/themes/my_demo/public/assets/images/s24w1.png

A3


- Complies with 802.11ac/a/b/g/n standards.

- 300Mbps on 2.4GHz and 867Mbps on 5GHz band simultaneously. 

- Two fixed high gain antennas with advanced MIMO technology.

- Supports PPPoE, DHCP and Static IP broadband functions.

- Provides 64/128-bit WEP,  WPA / WPA2 and WPAPSK / WPA2PSK security

- Connects to secure network easily and fast using WPS. 

- Supports IP, Port, MAC, URL filtering and Port Forwarding. 

- Multi-SSID allows user to create multiple SSIDs according to their needs.

- Universal repeater and WDS function for easy Wi-Fi extension.

- The VPN server can not only protect the privacy of your information, but also simplify network management

Hardware

Interface

- 2 * 10/100Mbps LAN Ports

- 1 * 10/100Mbps WAN Port

Power Supply - 9V DC / 0.8A

Antenna

- 2 *5dBi fixed dual band antennas

Button

- 1 * RST Button

- 1 * WPS Button

LED Indicators

- 1 * CPU

- 1 * Wireless 

- 1 * WAN

- 2 * LAN

Dimensions(L x W x H)

- 91 x 80 x 35 mm (not including antennas)

Wireless
Standards

- IEEE 802.11ac

- IEEE 802.11a 

- IEEE 802.11b

- IEEE 802.11g

- IEEE 802.11n

RF Frequency

- 2.4GHz/5GHz
Data Rate

- 2.4GHz: Up to 300Mbps

- 5GHz: Up to 867Mbps

EIRP

- < 20dBm 

Wireless Security - 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Reception Sensitivity

- 2.4GHz: 

  11b: <-79dbm;

  11g: <-68dbm;

  11n: HT20<-65dbm  HT40: <-61dbm


- 5G: 

  11a:<-68dbm;

  11ac: HT20<-65dbm  

  HT40: <-61dbm  

  HT80: <-51dbm

Software

WAN Type

- PPPoE/DHCP/Static IP 

Wireless Functions - Multiple SSID

- Wireless Bridge

- MAC Authentication

- WDS 

- WPS

- Wireless Scheduler

NAT / Routing

- Port Forwarding

- DMZ/Twin IP

- Port Trigger

Firewall - Internet Access Control: IP/MAC Address filtering

- Net Detector

Utility

- VPN, 

- DDNS, 

- WOL, 

- Host Scan, 

- IPTV

Traffic

- QoS, 

- Connection  Control

System

- System Log

- Admin Setup

- Firmware Upgrade

- System Time 

- Config 

- Backup and Restore

Others
Package Contents

- A3 Wireless Router *1

- Power Adapter *1

- Ethernet Cable *1

- Quick Installation Guide *1

Environment

- Operating Temperature: 0℃~40℃ (32 ℉~104℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing

  • 1

No

Title

Views
1

A3 WISP Settings

62

    This document applies to A3    

    Diagram    


图片1.png

    Preparation     

    ● Before configuration, make sure that both A Router and B Router are powered on.

    ● make sure you know the SSID and password for A router 

    ● Connect your computer to the same network of router A and B.

    ● Set both Router A and B should to the same band 2.4G or 5G.

    Feature    

    1.  B router can use PPPOE, static IP. DHCP function.

    2.  WISP can build its own base stations in public places such as airports, hotels, cafes, teahouses and other places, providing wireless Internet access services.

    Set up steps    

STEP-1 B-router wireless setting 

    You need to enter the settings page of the router B, then follow the steps illustrated.

    In the navigation bar, select Basic Setup->Wireless Setup-> Select 2.4GHz Basic network

    Setting Network SSID, channel, Auth, password

    Click the Apply button

    Repeat the steps 3 through 5 to complete the 5GHz Wi-Fi configuration

图片2.png


STEP-2 B-Router WISP setting

     Enter the settings page of the router B, then follow the steps illustrated.

    In the navigation bar, select Advanced Setup->Wireless->Wireless Multibridge

    For Wireless Multibrige, select 2.4GHz, if you want to use 5GHz for WISP, choose 5GHz.

    In Mode list, select Wireless Wan.

    Click the Ap Scan button 

   Click AP you need repeater, check SSID

    Enter the password for router A (You can check the box next to check the password you entered)

   Click the Apply button, Wait for the configuration to finish.

图片3.png


STEP-4 Check whether the B route IP address conflicts with route A.Option

If there is a conflict between the LAN IP addresses of the two routes, you need to check the Change LAN IP address automatically. Then click the Apply button and the router restarts. We can obtain the new IP address and login B route setting with the new IP address page. 

图片4.png


STEP-5 B Router position display

Move the Router B to a different location for a best Wi-Fi access.

图片5.png


2

A3 repeater settings

468

    This document applies to A3    

    Diagram    

1.png


    Preparation    

    ● Before configuration, make sure that both A Router and B Router are powered on.

    ● make sure you know the SSID and password for A router 

    ● Connect your computer to the same network of router A and B.

    ● move the B router closer to the A router to find the B routing signals better for fast repeater.

    ● Set both Router A and B should to the same band 2.4G or 5G.


    Set up steps    

STEP-1 B-Router Wireless Setup

You need to enter the settings page of the router B, then follow the steps illustrated.

     In the navigation bar, select Basic Setup->Wireless Setup-> Select 2.4GHz Basic network

 Setting Network SSID, channel, Auth, password

     Click the Apply button

     Repeat the steps 3 through 5 to complete the 5GHz Wi-Fi configuration

2.png



STEP-2 B-Router repeater setting

Enter the settings page of the router B, then follow the steps illustrated.

     In the navigation bar, select Advanced Setup->Wireless->Wireless Multibridge

     For Wireless Multibrige, select 2.4GHz. If you want to use 5GHz for Repeater, choose 5GHz.

     In Mode list, select Use Wireless Bridge.

     Click the Ap Scan button 

     Click AP you need repeater, check SSID

     Enter the password for router A (You can check the box next to check the password you entered)

     Click the Apply button, Wait for the configuration to finish.

3.png

Note: If repeater success, but you need to replace the network for repeater, there will be

prompted the following figure, click yes

4.png

STEP-3 B Router position display

Move the Router B to a different location for a best Wi-Fi access. 

5.png


3

A3 wireless SSID password modification setting

66

    Application introduction    

Wireless signals generally refer to Wi-Fi, wireless SSID and wireless password is the wireless terminal to connect the router to the Internet the most important two information. The actual use of the process, if there is no connection on the wireless, forget the wireless password, you need to view or modify the signal SSID and password.


    The operation of this document applies to the following modelsA3      

    Set up steps     

STEP-1: Enter the setup interface

Open the browser, clear the address bar, enter 192.168.0.1, fill in the administrator account and password (default admin admin), Enter the displayed verification code, click Login, and select Advance setup again, as follows:

1.png

2.png



STEP-2: View or modify the wireless parameters

2-1. In the Status Summary to view SSID and Password

Click Status Summary to view the SSID and password in Wireless Status (2.4GHz) and Wireless Status (5GHz). Figure, 2.4GHz signal set password, click View to View, 5GHz signal does not set the password, do not show the password.

3.png


    If you are setting up the WIFI SSID and password for the first time. you need to enter the Wireless Setup interface settings, here, to 2.4GHz signal settings as an example (5GHz settings the same). You can modify the SSID according to your preferences, select the encryption method (recommended WPA2PSK + AES (Recommended)), enter your ready Password, click Apply.

4.png

5.png



2-2. Check and modify In the Advanced Setup.

Of course, you can also click Wireless advanced setup to set more wireless parameters, as follows:

6.png



    Questions and Answers    

    Q1: After setting up the wireless signal, need to restart the router?

     A: No need. After setting the parameters, wait a few seconds for the configuration to take effect.


4

A3 WiFi schedule settings

232


     It is suitable for: A3


Application introduction: Solution about how to control the time of surfing the Internet for TOTOLINK products.


STEP-1: 

  Connect your computer to the router by cable, enter http://192.168.0.1

1.png


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Meanwhile you should fill in the vertification code .then Click Login. 

2.png

Then click the Advance Setup bottom

3.png


STEP-3: 

Please go to Advance Setup ->Firewall->Firewall, and check which you have selected. Select WIFI Schedule and WIFI 2.4G and time you want to restrain in to surf the Internet, then Click Apply.

4.png


5

A3 WDS Settings

200

    This document applies to A3    

    Diagram    


1.png

 

    Preparation      

      ●Before configuration, make sure that both A Router and B Router are powered on.

      ●Connect your computer to the same network of router A and B.

      ●move the B router closer to the A router to find the B routing signals better for fast WDS.

      ●A Router and Router should be set to the same channel.

      ●Set both Router A and B should to the same band 2.4G or 5G.

      ●Choose the same models for A-router and B-router. If not, WDS function may not be  implemented.


     Set up steps    

STEP-1 Set up WDS on A-router 

    Enter the setup page on router A, then follow the steps below.

In the navigation bar, select Advanced Setup->Wireless->Wireless Multibridge

For Wireless Multibrige, select 2.4GHz. If you want to use 5GHz for WDS, choose 5GHz.

In Mode list, select WDS.

Click the Ap Scan button.

2.png

    In 2.4G Wireless Network list, select B-Router for WDS.  

   Click the Apply button.

3.png


STEP-2 B-Router Wireless Setup

    Enter the settings page of the B Router, then follow the steps illustrated.

    ①In the navigation bar, select Basic Setup->Wireless Setup-> Select 2.4GHz Basic network

    ④Setting Network SSID, channel, Auth, password

    ⑤Click the Apply button

     Repeat the steps 3 through 5 to complete the 5GHz Wi-Fi configuration

4.png


STEP-3 B-router WDS setting

    Enter the settings page of the router B, then follow the steps illustrated.

    In the navigation bar, select Advanced Setup->Wireless->Wireless Multibridge

    ④For Wireless Multibrige, select 2.4GHz.( You must choose the same channel as Router A.)

    In Mode list, select WDS.

    Click the Ap Scan button 

5.png



    In 2.4G Wireless Network list, select A-Router for WDS  

    click the Apply button.

6.png


STEP-4 Turn off the B-routed DHCP server

  Follow the steps below to disable the DHCP function.

7.png


STEP-5 Restart B router

   Follow the following steps to restart Router B. Or you can directly disconnect the router from its electrical outlet. Once Router B is rebooted, Routers A and B are connected successfully via WDS.

8.png



STEP-6 B Router position display 

Move the Router B to a different location for a best Wi-Fi access. 

9.png


6

A3 Upgrade the software settings

66


     It is suitable for: A3



Application introductionSolution about how to upgrade Firewall on the TOTOLINK products.


STEP-1: 

Connect your computer to the router by cable, enter http://192.168.0.1

1.png


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Meanwhile you should fill in the vertification code .then Click Login. 

2.png

Then click the Advanced Setup bottom

3.png


STEP-3: Upgrade the software setting

  Please go to Advance Setup->System->Firewall Upgrade, and check which you have selected.

  Select Choice Your Local File,the Click Upgrade.

4.png

Note:

  1.DO NOT power off the device curind firmware upgrading.

  2.DO Reset the router to factory default settings by RST or RST/WPS button after firmware upgrading fineshed.


STEP-4: System reset

Please go to Advanced Setup->System->misc Setup, and check which you have selected.

Select Config BackupRestore, then Click Factory Default.

5.png

Or Please find the RST bottom in the box and use needle to press down the bottom more than five seconds.

6.png


7

A3 Reset settings

61


     It is suitable for: A3



Application introductionSolution about how to reset TOTOLINK products to factory defaults.


STEP-1: 

  Connect your computer to the router by cable, enter http://192.168.0.1

1.png


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Meanwhile you should fill in the vertification code .then Click Login. 

2.png

Then click the Advance Setup bottom

3.png


STEP-3: Login page reset

    Please go to Advanced Setup->System->misc Setup, and check which you have selected.

    Select Config BackupRestore, then Click Factory Default.

4.png

STEP-4: RST Button reset

    Please make sure your router’s power is on regularly, then press the

RST button for about 5~8s.

     Loosen the button until your router’s LED lights all flashing, then you

have reset your router to default settings.

5.png


8

A3 QOS settings

61


     It is suitable for: A3


Application : Solution about how to configure QoS on TOTOLINK products.


STEP-1: 

  Connect your computer to the router by cable, enter http://192.168.0.1

1.png


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Meanwhile you should fill in the vertification code .then Click Login. 

2.png


Then click the Advance Setup bottom

3.png


STEP-3: 

Please go to Advance Setup ->Traffic->Qos Setup and click Operation page, and select Start, then click Apply.

图片1.png

STEP-4:

Click Bandwidth page, and select Bandwidth Speed, then Input Download Speed and Upload Speed, then click Apply.

图片2.png


STEP-5: Add new rule

   Fill in IP Address and Down and Up Speed you want to restrain, then click Apply.

图片3.png


STEP-5: Smart QoS setting

Or you can set up Smart QoS. Click Smart QoS page, and select Start, then click Apply.

图片4.png


9

A3 PPPoE DHCP static IP settings

65


     It is suitable for: A3


Application : Solution about how to configure multiple SSID for TOTOLINK products.

Solution about how to configure Internet mode with PPPoE ,Static IP and DHCP for TOTOLINK products


STEP-1: 

  Connect your computer to the router by cable, enter http://192.168.0.1

1.png


STEP-2.1:

User Name and Password are required, by default both are admin in lowercase letter. Meanwhile you should fill in the vertification code .then Click Login. 

2.png

STEP-2.2:

Then click the Advance setup bottom

3.png



STEP-3.1.1: Easy Setup DHCP setting

Please go to Inernet Setup page, and check which you have selected.

Selecting DHCP IP as Connection Type .Then Click Apply.

4.png



STEP-3.1.2: Advanced Setup DHCP setting

Please go to Advance Setup ->Network ->Internet Setup page, and check which you have selected .Then return to STEP-3.1.1.

5.png



STEP-3.2.1: Easy Setup PPPOE setting

Please go to Inernet Setup page, and check which you have selected.

Selecting PPPoE as Connection Type .Then Click Apply.

6.png


STEP-3.2.2: Advanced Setup PPPOE setting

Please go to Advance Setup ->Network ->Internet Setup page, and check which you have selected .Then return to STEP-3.2.1.

7.png



STEP-3.3.1: Easy Setup Static IP setting

Please go to Inernet Setup page, and check which you have selected.

Selecting Static IP as Connection Type .Then Click Apply.

8.png


STEP-3.3.2: Advanced Setup Static IP setting

Please go to Advance Setup ->Network ->Internet Setup page, and check which you have selected .Then return to STEP-3.3.1.

9.png



10

A3 Multiple SSID settings

125

 

     It is suitable for: A3


Application : Solution about how to configure multiple SSID for TOTOLINK products


STEP-1: 

Connect your computer to the router by cable, enter http://192.168.0.1  

1.png


STEP-2: 

User Name and Password are required, by default both are admin in lowercase letter. Meanwhile you should fill in the vertification code .then Click Login. 

2.png

STEP-3:

Then click the Advance setup bottom

3.png

STEP-4:

   Please go to Advanced Setup->Wireless->Wireless Setup page,and check which you have selected.

   Click Select guest network and SSID buttons,then Click Apply

4.png