/themes/my_demo/public/assets/images/s24w1.png

N210RE


- Complies with IEEE 802.11n/g/b standards for 2.4GHz Wireless LAN.

- Up to 300Mbps data rate for Wi-Fi network. 

- Support DHCP, Static IP, PPPoE, PPTP and L2TP connection mode.

- Advanced security encryptions include 64/128-bit WEP, WPA, WPA2 and WPA-Mixed help to secure wireless communications.

- Connects to secure network easily and fast using WPS. 

- Supports IP, Port, MAC, URL filtering and Port Forwarding. 

- QoS and WMM features gives priorities to bandwidth-intensive applications like HD streaming and gaming

- Multi-SSID allows user to create multiple SSIDs according to their needs.

- Universal repeater and WDS function for easy Wi-Fi extension.

- Wireless timer switch to enjoy healthy life.With wireless timing function according set the time  to automatically turn on or turn off the wireless network, saving energy while allowing families to enjoy a healthy home environment.

- Easy setup with smartphone UI simplifies the basic settings

HARDWARE FEATURES
Interface

- 2 *10/100Mbps LAN Ports

- 1 *10/100Mbps WAN Port

Power Supply - 9V DC / 0.5A
Button

- 1 * RST/WPS Button

LED Indicators

- 1* System

Antenna

- 2 * 5dBi fixed antennas

Dimensions (L x W x H)

- 3.6 x 3.1 x 1.0 in. ( 91 x 80 x 25 mm)

Wireless

Standards

- IEEE 802.11b

- IEEE 802.11g

- IEEE 802.11n

RF Frequency

- 2.4~2.4835GHz
Data Rate

- 802. 11n: Up to 300Mbps

- 802.11g: Up to 54Mbps (dynamic)

- 802.11b: Up to 11Mbps (dynamic)

EIRP

- < 20dBm

Wireless Security - 64/128-bit WEP, WPA/WPA2 and WPA-Mixed
Reception Sensitivity

- 270M: -61 dBm@10% PER

- 135M: -65 dBm@10% PER

- 54M: -68 dBm@10% PER

- 11M: -85 dBm@8% PER

- 6M: -88 dBm@10% PER

- 1M: -90 dBm@8% PER

Software

Operation Mode

- Router Mode

- Repeater Mode

- AP Mode

- WISP Mode

Network

- Static DHCP Setting, 

- IPTV, 

- IPV6

WAN Type

- Static IP, 

- DHCP, 

- PPPoE/Russia PPPoE, 

- PPTP/Russia PPTP, 

- L2TP/Russia L2TP

Wireless Functions

- Multiple SSID, 

- Access Control, 

- WDS, 

- WPS

Schedule

- Reboot Schedule

- Wireless Schedule

QoS

- QoS Setup, 

- Connect Limit Control

Firewall

- MAC Filtering, 

- IP/Port Filtering, 

- URL Filtering,  

- Virtual Server(Port Forwarding) , 

- DMZ

USB Share

- DLNA Service, 

- FTP Server, 

- Samba Server

System

- Upgrade Firmware, 

- Save/Reload Settings, 

- Time Zone Settings, 

- DDNS, 

- Denial-of-Service, 

- TR-069 Config, 

- Password Settings, 

- System Log, and more

Others
Package Contents

- N210RE Wireless Router *1

- Power Adapter *1

- Ethernet Cable *1

- Quick Installation Guide *1

Environment

- Operating Temperature: 0℃~40℃ (32 ℉~104℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing

No

Title

Views
1

N200RE WDS Settings

8

    Application introduction    

   Settings Solution about how to configure WDS to TOTOLINK products.


   This document applies toN100RE, N150RT, N200RE, N210RE, N300RT, N301RT, N302Plus    

    Diagram    



1.png

    Preparation    

   ●   Before configuration, make sure that both A Router and B Router are powered on.

   ●   Connect your computer to the same network of router A and B.

   ●    move the B router closer to the A router to find the B routing signals better for fast WDS.

   ●    A Router and Router should be set to the same channel.

   ●    Set both Router A and B should to the same band 2.4G.

   ●    Choose the same models for A-router and B-router. If not, WDS function may not be implemented.


    Set up steps    

STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

2.png

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

3.png

STEP-3: A-router setting

3-1. Firstly connect the Internet for A-router then please go to Wireless ->WDS Settings page, and check which you have selected.(The type of A-router and B-router should be same )

Select Enable, then Input MAC Address of B-router in A-router and Select Auto for Data Rate, then Click Apply.

4.png

3-2. Please go to Wireless ->Advanced Settings page, select Channel Number which you must choice equal for the B-router.

5.png

STEP-4: B-router setting

4-1. Secondly use Bridge Mode for B-router then please go to Wireless ->WDS Settings page, and check which you have selected.

Select Enable, then Input MAC Address of A-router in B-router and Select Auto for Data Rate, then Click Apply.

6.png

4-2. Please go to Wireless ->Advanced Settings page, select Channel Number which you must choice equal for the A-router.

7.png

2

N200RE WISP Setting

7

    Application introduction    

WISP mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.

    This document applies toN100RE, N150RT, N200RE, N210RE, N300RT, N302R Plus    


    Diagram    

1.png

    Preparation    

   ● Before configuration, make sure that both A Router and B Router are powered on.

    ● make sure you know the SSID and password for A router 

    ● move the B router closer to the A router to find the B routing signals better for fast WISP

    Feature     

    1. B router can use PPPOE, Static IP, DHCP function.

    2. WISP can build its own base stations in public places such as airports, hotels, cafes, teahouses and other places, providing wireless Internet access services.

    Set up steps    

STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

2.png

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click Login. 

3.png

STEP-3:

Please go to Operation Mode ->WISP Mode->Click Apply.

4.png

STEP-4:

Select WAN Type(PPPOE,Static IP,DHCP).Then Click Next.

5.png

STEP-5:

Firstly select Scan , then select host routers SSID and input Password of the host routers SSID, then Click Next.

6.png


STEP-6:

Then you can change SSID in as below steps ,input SSID and Possword you want to fill ,then Click Connect.

7.png


PS: After completing the above operation, please re-connect your SSID after 1 minute or so.if the Internet is available it means that the settings are successful. Otherwise, please re-set the settings again

 

Questions and answers

Q1: How do I reset my router to factory settings?

A: When turning on the power, press and hold the reset button (reset hole) for 5~10 seconds. The system indicator will flash quickly and then release. The reset was successful.

3

How to use and set up IPTV

20

    Application introduction    

IPTV is an interactive network television, is a collection of Internet, multimedia, communications and other technology at an organic whole, through the Internet broadband lines to provide a wide range of interactive services, including digital television, the new technology.Users can watch the rich IPTV program at home via a network set-top box and a regular TV.

    This document applies to:N100RE, N150RT, N200RE, N210RE, N300RT, N302R Plus, A3002RU   

Part A: Introduce of IPTV setting page.

We can see the configuration webpage of the IPTV as below.

1.png

This article will guide you to configure the IPTV mode and LAN ports.


Part B: How to configure IPTV function correctly

Before IPTV is enabled, check with your ISP to confirm whether the current line supports VLAN TAG.

STEP-1:

If your current line supports VLAN TAG.You need to check Internet Tag and IPTV Tag,then you need to type in the VID fo different services (VID is provided by ISP).If you want to set some ports for IPTV (eg:port1), you should follow the steps below to configure.

①Choose IPTV Setting.→②Choose Triple Play/IPTV to open IPTV.→③Check Internet Tag and IPTV Tag.→④Enter type in the VID for different services.→⑤Check the LNA1 configuration.→⑥click “Save” to complete the configuration.

2.png


For example, if my ISP has told me that they use VLAN 40 for Internet service and VLAN 50 for IPTV service, I type in the parameters as above.

STEP-2:

If your current line does not support VLAN TAG.Please uncheck Internet Tag and IPTV Tag, and then leave the default Settings for the IPTV page.If you want to set some ports for IPTV (eg:port1), you should follow the steps below to configure.

①Choose IPTV Setting.→②Choose Triple Play/IPTV to open IPTV.→③Check the LNA1 configuration.→④click “Save” to complete the configuration.

3.png


Note: when you are not aware of your VLAN TAG, it is recommended that you configure it according to the STEP-2 method.

STEP-3:

Finally, connect the set-top box to LAN1 to watch IPTV, which requires a computer on the Internet, a mobile phone directly connected to a router or a wireless connection set up wirelessly.

4

A3002RU WiFi schedule settings

112


     It is suitable for: N100RE, N150RT, N200RE, N210RE, N300RT, N302R Plus, A3002RU


Application introduction: Solution about how to control the time of surfing the Internet by wi-fi for TOTOLINK products. This document takes A3002RU as an example.


STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

1.png

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

2.png


STEP-3: 

    Please go to Wireless 2.4GHz->Wireless Schedule, and check which you have selected.

    Select Enable and time you want to restrain in to surf the Internet, then Click Apply.

3.png



STEP-4:

Please go to Wireless 5GHz->Wireless Schedule, and check which you have selected.

Select Enable and time you want to restrain in to surf the Internet, then Click Apply.

4.png

5

A3002RU QOS settings

267


     It is suitable for: N100RE, N150RT, N200RE, N210RE, N300RT, N302R Plus, A3002RU


Application introduction: Solution about how to configure QoS on TOTOLINK products.


STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

1.png

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

2.png

STEP-3: IPV4 QOS setting

Please go to QoS page, and check which you have selected. Select Enable and fill in Manual Uplink/Downlink Speed, then click IPv4 bottom 

You can fill in IP Address and Total Uplink Bandwidth and Total Downlink Bandwidth you want to restrain,  then Click Apply.

3.png



STEP-4: IPV6 QOS setting

Please go to QoS page, and check which you have selected. Select Enable and fill in Manual Uplink/Downlink Speed, then click IPv6 bottom 

You can fill in IP Address and Total Uplink Bandwidth and Total Downlink Bandwidth you want to restrain,  then Click Apply.

4.png

6

N300RT repeater settings

277

    Application introduction    

Solution about how to set repeater mode on TOTOLINK products.


   This document applies to:                                                                

      N100RE, N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus     



    Settings    

STEP-1: 

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

1.png

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.


STEP-2: 

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

2.png

STEP-3:

Please go to Operation Mode ->Repteater (Extender), then Click Apply/Next.

3.png


STEP-4:

Firstly select Scan , then select host routers SSID and input Password of the host routers SSID, then select Change SSID and Possword to input SSID and Possword you want to fill in,then Click Connect.

4.png

PS: After completing the above operation, please re-connect your SSID after 1 minute or so.if the Internet is available it means that the settings are successful. Otherwise, please re-set the settings again






7

N300RT(N100RE N200RE N150RT N302R Plus)Wireless SSID password settings

246

    Application introduction    

The Wireless SSID and password are the basic information for you to connect Wi-Fi network. But sometimes you may forget or want to change them regularly, so here we will guide you how to check or modify the wireless SSID and password.

       This document applies to:                                                                                                                  

       N100RE, N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus     


    Settings    

STEP-1: Enter the setup interface

Open a browser, enter 192.168.0.1. Input User Name and password (default admin/admin) on login management interface, as follows:

Note: The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

1.png


STEP-2: View or modify the wireless parameters

2-1. Check or modify in Easy Setup page.

Login management interface, first enter the Easy Setup interface, you can see 5G and 2.4G wireless settings, as follows:

2.png


2-2. Check and modify In the Advanced Setup

If you also need to set more parameters for WiFi, you can enter the Advanced Setup interface to set up.

3.png

Set the SSID and password according to the following procedure.

4.png


You are also able to set the Channel Width, Date Rate, RF Output Power.

5.png


    Questions and Answers    

Q1: Should I restart the router after setup wireless information?

A: After setting, you need to wait a few seconds for the wireless information to take effect.

8

A3002RU Upgrade the software settings

137


     It is suitable for: N100RE, N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus, A702R, A850, A3002RU


Application:Solution about how to upgrade Firewall on the TOTOLINK products.


STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

1.png

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

2.png


STEP-3: Upgrade the software setting

Please go to System ->Upgrade Firmware page, and check which you have selected.

Select Local Upgrade files, then Click Upgrade 

    Then select Save/Reload Settings and click reset .

3.png

Note:DO Reset the router to factory default settings by RST or RST/WPS button after firmware upgrading fineshed.


STEP-4: System reset

Please go to System->Save/Reload Settiings page, and check which you have selected.Then Click Reset

4.png


Or please find the RST bottom in the box and use needle to press down the bottom more than five seconds.

5.png

9

A3002RU Reset settings

1508


     It is suitable for:N100RE, N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus, A702R, A850, A3002RU


Application:Solution about how to reset TOTOLINK products to factory defaults.


STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

1.png

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

2.png


STEP-3: Login page reset

Please go to System->Save/Reload Settiings page, and check which you have selected.

then Click Reset.

3.png


STEP-4: RST Button reset

Please make sure your router’s power is on regularly, then press the

RST button for about 5~8s.

Loosen the button until your router’s LED lights all flashing, then you

have reset your router to default settings.

4.png

10

A3002RU PPPoE DHCP static IP settings

217


     It is suitable for: N100RE, N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus, A702R, A850, A3002RU


Application:Solution about how to configure Internet mode with PPPoE ,Static IP and DHCP for TOTOLINK products


STEP-1:

    Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

1.png

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.


STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

2.png


STEP-3.1.1: Easy Setup DHCP setting

The Easy Setup page will turn up for basic and quick settingSelect DHCP Client  as WAN Connection Type, then Click Apply.

3.png

STEP-3.1.2: Advanced Setup DHCP setting

Please go to Network ->WAN Setting page, and check which you have selected.

Select DHCP Client as WAN Type, then Click Apply.

4.png


STEP-3.2.1: Easy Setup PPPOE setting

The Easy Setup page will turn up for basic and quick setting ,Select PPPoE as WAN Type and input your PPPoE username and password which are provided by your ISP. Then Click Apply

5.png



STEP-3.2.2: Advanced Setup PPPOE setting

Please go to Network ->WAN Setting page, and check which you have selected.

Select PPPoE as WAN Type and input your PPPoE username and password which are provided by your ISP. Then Click Apply

6.png

STEP-3.3.1: Easy Setup Static IP setting

The Easy Setup page will turn up for basic and quick setting,Selecting Static IP as WAN Connection Type and input your information about Static IP which you want to fill in .Then Click Apply

7.png


STEP-3.3.2: Advanced Setup Static IP setting

Please go to Network ->WAN Setting page, and check which you have selected.

Select Static IP as WAN Type and input your information about Static IP which you want to fill in .Then Click Apply

8.png