/themes/my_demo/public/assets/images/s24w1.png

T10


- Complies with the next generation IEEE 802.11ac Wi-Fi standard.

- 867Mbps on 5GHz and 300Mbps on 2.4GHz band for total 1167Mbps simultaneously.

- Smart Mesh networking with one touch.

- Supports multiple devices extension for wide Wi-Fi coverage.

- Wireless roaming helps users auto switch to stronger signal source.

- Next-GEN MU-MIMO technology improves user experience comprehensively.

- 1GHz processor provides powerful performance with low power consumption.

- Intelligent Beamforming delivers highly targeted and efficient Wi-Fi connection.

- Full gigabit WAN and LAN ensures high speed Internet access and wired speed.

- Supports DHCP, Static IP, PPPoE, PPTP and L2TP broadband functions.

- Provides 64/128-bit WEP, WPA, WPA2 and WPA/WPA2 (TKIP+AES) security.

- Connects to secure network easily and fast using WPS.

- QoS: Bandwidth Control based on IP address.

- Classic black and white design with compact size.


Hardware

Interface

- 2 *1000Mbps LAN Ports

- 1 *1000Mbps WAN Port

Power Supply - 12V DC / 1A
Button

- 1 *Mesh/RST Button

LED Indicators - 1 *Status
Antenna

- 2 *Internal Antennas(2.4G/5G)

Dimensions (L x W x H) - 89 x 89 x 68.5mm

Wireless

Standards

- IEEE 802.11ac, 

- IEEE 802.11n, 

- IEEE 802.11g, 

- IEEE 802.11b, 

- IEEE 802.11a ,

- IEEE802.11s

RF Frequency

- 2.4GHz/5GHz
Data Rate

- 2.4GHz: Up to 300Mbps

- 5GHz: Up to 867Mbps

EIRP

- 2.4GHz < 20dBm

- 5GHz < 20dBm 

Wireless Security - 64/128-bit WEP, WPA, WPA2 and WPA-Mixed 
Reception Sensitivity

- 2.4G: 11b 11M: 20±1.5dBm

            11g 54M: 17±1.5dBm

            11n HT20: 16±1.5dBm  HT40: 16±1.5dBm


- 5G: 11a 54M: 18±2dBm

         11n HT20 MCS7: 17±2dBm  HT40 MCS7: 17±2dBm

         11ac VHT80 MCS9: 16±2dBm

Software

Operation Mode


- Gateway Mode

- Repeater Mode

- AP Mode

- WISP Mode

- Mesh Mode

Network

- Static DHCP Setting, 

- IPTV

WAN Type

- Static IP, 

- DHCP, 

- PPPoE/Russia PPPoE, 

- PPTP/Russia PPTP, 

- L2TP/Russia L2TP

Wireless Functions

- Multiple SSID, 

- MAC Authentication, 

- WDS, 

- WPS, 

- WMM

Schedule

- Reboot Schedule,

- Wireless Schedule

Firewall

- IP/Port Filtering, 

- MAC Filtering, 

- URL Filtering, 

- Port Forwarding, 

- VPN Passthrough, 

- DMZ

Management

- Administrator Setting, 

- Time Setting, 

- DDNS, 

- Remote Management, 

- UPnP, 

- Upgrade Firmware, 

- System Configuration, 

- System Log, and more

Others
Package Contents

- T10 Wireless Router *1

- Power Adapter *1

- Ethernet Cable *1

- Quick Installation Guide *1


Remark:

The product is 3 in1 package, above is single product specifications


Environment

- Operating Temperature: 0℃~50℃ (32 ℉~122℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing

  • 1

  • 2

No

Title

Views
1

How to setup TOTOLINK Router on App

468


     It is suitable for: TOTOLINK router

Application introduction:

This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.

 

 Set up steps 

STEP-1: Follow the steps below to connect your router.

图片55.png 

STEP-2: Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.

图片56.png 

STEP-3: Launch the Tether App on your phone.

 图片57.png

STEP-4: Select your TOTOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.

 图片59.png

STEP-5: Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)

 图片60.png

STEP-6: Quick Setup.

 图片62.png图片64.png


STEP-7: More features: Click Application or Tools.

 图片68.pngSTEP-8: Binding router, remote management. 

图片70.png

2

T10 Quick Setup Guide

138

     It is suitable for: T10

Package Contents

• 1 T10 Master

• 2 T10 Satellites

• 3 Power Adapters

• 3 Ethernet Cables

 

Steps

1. Remove the power cord from your modem. Wait 2 minutes.

2. Insert an ethernet cable into your modem.

3. Connect ethernet cable from modem into the yellow WAN port of the T10 labeled Master.

4. Power on your modem and wait until it is fully booted.

5. Power on the Master and wait until status LED is blinking green.

6. Connect to the Master’s SSID labeled TOTOLINK_XXXXXX or TOTOLINK_XXXXXX_5G.

7. Once successfully connected to the Master and able to access the Internet, please change the SSID and password to that of your choosing for security reasons. Then you can position the 2 sateIIites throughout your home.

Note: The color of the sateIIite’s status LED acts as a signal strength indicator.

Green/Orange = Excellent or OK signal

Red = Poor signal, needs to be moved closer to the Master

 

FAQs

How to set my own SSID and Password?

1. Connect to the Master using a wired or wireless connection.

2. Open a web browser and enter http://192.168.0.1 into the address bar.

3. Enter User Name and Password and click Login. Both are admin by default in lowercase letters.

4. Enter your new SSID and Password within the Easy Setup Page for both 2.4Ghz and 5Ghz bands. Then click AppIy.

Note: The default access address is located on the bottom of each unit. However, this may vary de- pending on your network configuration. In most cases, if this address does not work you may try the alternate address 192.168.1.1. Also, check your Wi-Fi settings to make sure you are connected to the router you are trying to configure.

 

For questions or additionaI assistance in setting up your T10 WhoIe Home Wi-Fi Mesh System, pIease contact us at fae@zioncom.net

3

How to set up static DHCP

219

     It is suitable for: N300RH_V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU, A7000R

Set up steps 

STEP-1: Connect your computer

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

图片1.jpg

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

图片2.png 

STEP-3:

Select advanced settings to enter the settings page

图片3.png 

STEP-4:

Enter the  Static DHCP Setting to open the setting and checklist the Enable,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.

图片4.png

4

T10 Updated Quick Setup Guide

91

Package Contents

• 1 T10 Master

• 2 T10 Satellites

• 3 Power Adapters

• 3 Ethernet Cables

 

Steps

1. Remove the power cord from your modem. Wait 2 minutes.

2. Insert an ethernet cable into your modem.

3. Connect ethernet cable from modem into the yellow WAN port of the T10 labeled Master.

4. Power on your modem and wait until it is fully booted.

5. Power on the Master and wait until status LED is blinking green.

6. Connect to the Master’s SSID labeled TOTOLINK_T10 or TOTOLINK_T10_5G. Password is

abcdabcd for both bands.

7. Once successfully connected to the Master and able to access the Internet, please change the SSID and password to that of your choosing for security reasons. Then you can position the 2 sateIIites throughout your home.

Note: The color of the sateIIite’s status LED acts as a signal strength indicator.

Green/Orange = Excellent or OK signal

Red = Poor signal, needs to be moved closer to the Master

 

FAQs

How to set my own SSID and Password?

1. Connect to the Master using a wired or wireless connection.

2. Open a web browser and enter http://192.168.0.1 into the address bar.

3. Enter User Name and Password and click Login. Both are admin by default in lowercase letters.

4. Enter your new SSID and Password within the Easy Setup Page for both 2.4Ghz and 5Ghz bands. Then click AppIy.

Note: The default access address is located on the bottom of each unit. However, this may vary de- pending on your network configuration. In most cases, if this address does not work you may try the alternate address 192.168.1.1. Also, check your Wi-Fi settings to make sure you are connected to the router you are trying to configure.

 

For questions or additionaI assistance in setting up your T10 WhoIe Home Wi-Fi Mesh System, pIease contact us at fae@zioncom.net

5

How to Find T10’s Serial Number and upgrade firmware

183

     It is suitable for: T10

 Set up steps 

STEP-1:Guide for Hardware Version

For most TOTOLINK routers, you can see two bar coded stickers underneath each device, the character string will begin with Model No.(T10) and end with the serial number for each device. See below:

1.png 

 

STEP-2: Download Firmware

Open browser, enter www.totolink.net. Download the required files.

For example, if your hardware version is V2.0 , please download V2 version.

2.png 

 

STEP-3: Unzip the file

The correct upgrade file name is suffixed with ”web”.

3.png 

 

STEP-4: Upgrade Firmware

❶Click Management->upgrade firmware. ❷With configuration upgrade (if selected, the router will be restored to the factory configuration).❸Choose the firmware file you want to upload. Finally❹Click Upgrade button. Wait for a few minutes while the firmware is updating, and the router will restart automatically.

4.png 

Notice:

1. DO NOT power off the device or close the browser window while uploading as it may crash the system.

2. When downloading the correct firmware update, you'll want to extract and upload the Web File

format type

6

How to use the router's WPS button?

188

     It is suitable for: All TOTOLINK routers

Application introduction 

This article describes how to quickly make a wireless connection through the router's WPS button.

Diagram

1.png 

Set up steps 

STEP-1:

Please make sure your router has WPS button before setting.

Please make sure your wireless client supports WPS functionality before setting.

 

STEP-2:

Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.

2-1. RST/WPS button

2.png 

2-2. WPS button:

QQ截图20200821135919.png 

Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.

 

STEP-3:

After pressing the WPS button, use wireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example. As shown below.

3-1. Computer wireless connection:

3.png 

3-2. Mobile phone  wireless connection:

4.png

7

How to login to router by manually configuring IP?

343

     It is suitable for: All TOTOLINK routers

Set up steps 

STEP-1: Connect your computer

Connect to the router's LAN port with a network cable from a computer network port (or to search for and connect the  router's wireless signal).

 

STEP-2: Assigned manually IP Address

2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.

1.png 

 

2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.

2.png 

STEP-3: Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example.

3.png 

STEP-4: After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.

4.png 

Note: Your terminal device must choose to obtain an IP address automatically to access the network.

8

Introduction to the four Operation Mode of the router

262

     It is suitable for: All TOTOLINK routers

Application introduction 

This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.

 

 Set up steps 

STEP-1: Router Mode(Gateway mode)

Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.

1.png 

STEP-2: Repeater mode

Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.

2.png 

STEP-3: AP mode(Bridge mode)

AP mode, the router acts as a wireless switch, you can transfer the superior's AP/Router wired signal into wireless signal.

3.png 

STEP-4: WISP Mode

WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.

4.png

 

 FAQ Common problem 

Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?

A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.

 

Q2: How to enter the router management interface in AP mode/Repeater mode?

A: Refer to FAQ#How to login to router by manually configuring IP

9

What if the Router can't log in to the new Chrome?

167

     It is suitable for: All TOTOLINK Router

Application introduction 

After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png


Method One: login via PC 

STEP-1: Change browser and clear browser cache

Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache. 2.png

Delete cookies on the web browser. Here we take Firefox for example.

Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.

3.png 

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

4.png 

 

 Method Two: login via tablet/Cellphone 

STEP-1: Change browser and clear browser cache

Try other browser, such as Firefox, Opera, etc., and clear your browser cache.

5.png

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

6.png

10

How to synchronize the router's system time with internet time?

97

     It is suitable for: N300RH_V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU

Application introduction 

You can maintain the system time by synchronizing with a public time server over the Internet.

 

Set up steps 

STEP-1:Login to the TOTOLINK router in your browser.

1.png 

STEP-2: In the left menu, click Management->Time Setting, follow the steps below.

Time Zone select

click NTP Client Update

Enter NTP Server

click Apply

click Copy PC's  Time


2.png 

[Note]:

Before time Setting, you need to confirm that the router is connected to the internet.