/themes/my_demo/public/assets/images/s24w1.png

A720R


-  Comply with the IEEE 802.11ac Wave 2 Wi-Fi standard.

- 1167Mbps in total on dual band, 867Mbps on 5GHz and 300Mbps on 2.4GHz 

- Beamforming technology allows to intensively transmit the signal to the directions of the other wireless connected terminals, improving the using-efficiency of the bandwidth and reducing the dead spots and the surrounding unnecessary RF interference.

- Fast WAN/LAN ports offers a stable capability for data streaming via cable connection.

- Support DHCP, Static IP, PPPoE, PPTP and L2TP connection mode.

- Support IPv6, the next generation of internet protocol, helping you to future-proof your network.

- Provides WPA/WPA2 mixed security.

- QoS function allows to change the bandwidth for different terminals via IP address.

- IPTV function allows to enjoy online movies at home.

- Support IP address filtering, port filtering, MAC filtering, URL filtering and port forwarding. 

- Multiple SSIDs allows to create different SSIDs for different groups, better for Internet access management.

- Smart UI design or totolink router APP is easy for the users to finish the basic configuration with their cellphones.

Hardware

Interface

- 2 * 100Mbps LAN Ports

- 1 * 100Mbps WAN Port

Power Supply 

- 9VDC/0.8A 

Button 

- 1 * RST/WPS Button

LED Indicator

- 1 * SYS

Antenna 

- 2 * 2.4GHz fixed antennas(5dBi)

- 2 * 5GHz fixed antennas(5dBi)

Dimensions (L x W x H)

- 120 x180 x 256mm (not including antennas)

Wireless

Standards 

- IEEE 802.11ac, 

- IEEE 802.11a, 

- IEEE 802.11b, 

- IEEE 802.11g ,

- IEEE 802.11n, 

- IEEE 802.11s

RF Frequency 

- 2.4GHz/5GHz

Data Rate  - 2.4GHz: 300Mbps 
- 5GHz: 867Mbps 
EIRP  - 2.4GHz < 20Bm 
- 5GHz < 20dBm 

Wireless Security

- WPA/WPA2 Mixed 

Reception Sensitivity

                     

- 2.4G:11b 11M:-81dBm@8% PER

          11g 54M:-68dBm@10% PER

          11n HT20 MCS7:-65dBm@10% PER   

                 HT40 MCS7:-62dBm@10% PER

                           

- 5G: 11a 54M:-68dBm@10% PER

         11n HT20 MCS7:-65dBm@10% PER    

                HT40 MCS7:-62dBm@10% PER

          11ac VHT80 MCS9:-51dBm@10% PER

Software

Operation Mode

- Gateway Mode       
- Repeater Mode

- AP Mode                 
- WISP Mode

Home

- Quick Setup           
- Basic setup             
- Advanced setup

- QR Code                 
- LED                       
- Logout   

- Reboot

Network

- WAN Setting           
- LAN Setting           
- DDNS Setting

- IPTV Setting           
- IPv6 Setting

WAN Type

- Static IP, 

- DHCP, 

- PPPoE/Russia PPPoE, 

- PPTP/Russia PPTP, 

- L2TP/Russia L2TP

Wireless

- Basic setup             
- Guest Network(Multiple SSID)        

- Wireless Schedule   

- Access Control       
- Advanced setup

Parental Control

- Internet time control based on MAC

QoS

- Up/Down speed control on WAN, 

- Bandwidth control based on IP address

Device managemen

- Static Route           
- Routing Table       
- IP/MAC Binding

Security

- MAC Filtering         
- IP/Port Filtering     
- URL Filtering 

NAT

- Virtual Server(Port Forwarding)             
- DMZ   
- VPN passthrough

Tools

                     

- Upgrade Firmware 
- Time Setup           
- Remote manageme

- Password Settings 
- Reboot Schedule 
- System Log and so on  

Others

Package Contents

                     

- A720R Wireless Router *1

- Power Adapter *1

- Ethernet Cable *1

- Quick Installation Guide *1

Environment

- Operating Temperature: 0℃~50℃ (32 ℉~122℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

 - Operating Humidity: 10%~90% non-condensing

 - Storage Humidity: 5%~90% non-condensing


  • 1

  • 2

No

Title

Views
1

How to setup TOTOLINK Router on App

356


     It is suitable for: TOTOLINK router

Application introduction:

This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.

 

 Set up steps 

STEP-1: Follow the steps below to connect your router.

图片55.png 

STEP-2: Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.

图片56.png 

STEP-3: Launch the Tether App on your phone.

 图片57.png

STEP-4: Select your TOTOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.

 图片59.png

STEP-5: Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)

 图片60.png

STEP-6: Quick Setup.

 图片62.png图片64.png


STEP-7: More features: Click Application or Tools.

 图片68.pngSTEP-8: Binding router, remote management. 

图片70.png

2

How to use and set up IPTV on New User Interface?

183

     It is suitable for: N200RE_V5, N350RT, A720R, A3700R, A7100RU, A8000RU

Application introduction:

This article will introduce the configuration of IPTV function and will guide you to configure this function correctly

Note:

If you have already accessed to Internet and IPTV function normally by default, please ignore this article, just keep the default settings of IPTV page.

In this article, we will take N350RT as an example.


Set up steps 

STEP-1: Log in the Web-configuration interface

Connect your computer to the router by cable or wireless, enter http://192.168.0.1

图片49.png 

STEP-2: Introduce of IPTV setting page

On the left menu, go to Network->IPTV Setting.

图片50.png 

STEP-3: We can see the configuration webpage of the IPTV

Please keep the IGMP Proxy and IGMP version as default, unless your ISP told you to modify.

图片51.png 

STEP-3: Whats the difference between different IPTV modes

There are many “mode” available in the IPTV setting page.These modes are designed for different ISPs. In other words, the mode which you need to choice is up to your ISP.

图片52.png 

Obviously, Singapore-singtel, Malaysia-Unifi, Malaysia-Maxis, VTV and Taiwan are designed for specific ISPs. They doesnt need you to type in VLAN information, we just use this mode when ISP doesnt require VLAN settings.

User Define mode is used for some of the ISPs which require 802.1Q VLAN settings for IPTV service.

STEP-4: Whats the difference between different IPTV modes

If your ISP is singtel, Unifi, Maxis, VTV or Taiwan. Just select Singapore-singtel, Malaysia-Unifi, Malaysia-Maxis, VTV or Taiwan mode. Then you need not to type in any information more if you choose these mode, just click Apply to complete the configuration.Please refer to the steps below to configure this mode.

Here I select Taiwan Mode, LAN1 for IPTV service as an example.

图片53.png 

STEP-5: If your ISP is not in the list and needs VLAN settings

If your ISP is not in the list and needs VLAN settings. Please select Custom mode and type in the detailed parameters manually. You need check the information to your ISP at first. Please follow the steps below to configure.

图片54.png 

Select Enabled to open up IPTV function.

Select User Define mode

Then set LAN ports for different services. For example, here I select LAN1 for IPTV service.

The 802.1Q Tag and IPTV Multicast VLAN ID are up to your ISP. (Normally the 802.1Q Tag should be checked).

⑤⑥Type in the VLAN ID for different services, the VLAN ID should be provided by your ISP. For example, if my ISP has told me that they use VLAN 10 for Internet service, VLAN 20 for IP-Phone service and VLAN 30 for IPTV service. And the priority need not to configure.

click Apply” to complete the configuration.


3

A720R Quick Installation Guide

738

     It is suitable for: A720R

 Installation Diagram

图片26.png 

Interface

图片27.png 

Method One: login via tablet/Cellphone

STEP-1:

Activate the WLAN function on your Phone and connect to TOTOLINK_A720R or TOTOLINK_A720R_5G . Then run any Web browser and enter http://itotolink.net in the address bar.

 图片28.png

STEP-2:

Enter admin for the password and then click LOGIN. 

图片29.png 

STEP-3:

Click Quick Setup.

 图片30.png

STEP-4:

Time Zone setting. According to your location, please click the Time Zone to choose a correct one from the list, then click Next.

图片31.png 

STEP-5: 

Internet Setting. Choose a suitable connection type from the list and fill in the information required, then click Next.

图片33.png 

STEP-6: 

Wireless Setting. Create passwords for 2.4G and 5G Wi-Fi (Here users could also revise the default Wi-Fi name) and then click Next.

图片34.png 

STEP-7: 

For security, please create a new Login Password for your router, then click Next.

 图片35.png

STEP-8: 

The coming page is the Summary information for your setting. Please remember your Wi-Fi Name and Password, then click Done.

图片36.png 

STEP-9: 

It takes several seconds to save the settings and then your router will restart automatically. This time your Phone will be disconnected from the router. Please back to the WLAN list of your phone to choose the new Wi-Fi name and input the correct password. Now, you could enjoy the Wi-Fi.

 图片37.png

STEP-10:

More features: Click Application.

 图片39.png

STEP-11:

More features: Click Tools 

 图片41.png

STEP-12:

More features: Click PC.

图片42.png 

 

Method Two: login via PC

STEP-1:

Connect your computer to the router by cable or wireless. Then run any Web browser and enter http://itotolink.net in the address bar.

STEP-2:

Enter admin for the password and then click LOGIN. 

图片44.png 

STEP-3:

Click Quick Setup. 

图片45.png图片46.png

图片47.png

图片48.png

4

How to use the router's WPS button?

146

     It is suitable for: All TOTOLINK routers

Application introduction 

This article describes how to quickly make a wireless connection through the router's WPS button.

Diagram

1.png 

Set up steps 

STEP-1:

Please make sure your router has WPS button before setting.

Please make sure your wireless client supports WPS functionality before setting.

 

STEP-2:

Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.

2-1. RST/WPS button

2.png 

2-2. WPS button:

QQ截图20200821135919.png 

Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.

 

STEP-3:

After pressing the WPS button, use wireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example. As shown below.

3-1. Computer wireless connection:

3.png 

3-2. Mobile phone  wireless connection:

4.png

5

How to login to router by manually configuring IP?

301

     It is suitable for: All TOTOLINK routers

Set up steps 

STEP-1: Connect your computer

Connect to the router's LAN port with a network cable from a computer network port (or to search for and connect the  router's wireless signal).

 

STEP-2: Assigned manually IP Address

2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.

1.png 

 

2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.

2.png 

STEP-3: Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example.

3.png 

STEP-4: After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.

4.png 

Note: Your terminal device must choose to obtain an IP address automatically to access the network.

6

Introduction to the four Operation Mode of the router

172

     It is suitable for: All TOTOLINK routers

Application introduction 

This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.

 

 Set up steps 

STEP-1: Router Mode(Gateway mode)

Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.

1.png 

STEP-2: Repeater mode

Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.

2.png 

STEP-3: AP mode(Bridge mode)

AP mode, the router acts as a wireless switch, you can transfer the superior's AP/Router wired signal into wireless signal.

3.png 

STEP-4: WISP Mode

WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.

4.png

 

 FAQ Common problem 

Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?

A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.

 

Q2: How to enter the router management interface in AP mode/Repeater mode?

A: Refer to FAQ#How to login to router by manually configuring IP

7

What if the Router can't log in to the new Chrome?

126

     It is suitable for: All TOTOLINK Router

Application introduction 

After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png


Method One: login via PC 

STEP-1: Change browser and clear browser cache

Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache. 2.png

Delete cookies on the web browser. Here we take Firefox for example.

Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.

3.png 

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

4.png 

 

 Method Two: login via tablet/Cellphone 

STEP-1: Change browser and clear browser cache

Try other browser, such as Firefox, Opera, etc., and clear your browser cache.

5.png

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

6.png

8

How to properly download upgrade firmware of router?

138

     It is suitable for: All TOTOLINK routers

 Preparation 

Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade. 

Wrong firrmware version may damage your device and no warrante.


 Set up steps 

STEP-1: Guide for Hardware Version

For most TOTOLINK routers, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example N300RT) and ended with Hardware Version (for example V2.0) is the serial number of your device. See below:

1.png 

STEP-2:

Open browser, enter www.totolink.net. Download the required files.

For example, if your hardware version is V2.0 , please download V2 version.

Note: If the hardware version is V1, V1 will be hidden.

2.png 

 

STEP-3:

Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)

3.png

9

How do I get the login address of my router

321

    It is suitable for:  All TOTOLINK Router  


    Method One:  

Check the label on the bottom of the router to get the login address of the router, as shown below.

QQ截图20200820163526.png


   Method Two:  

Obtain the login address of the router through the computer (take win10 system as an example).

STEP-1: 

The computer connects to the wireless signal of the router. (The back sticker has the factory default wireless signal name)

STEP-2: 

2-1. Click on wireless icon at the bottom right corner on the screen, Select Network & Internet settings.

4.png

2-2. Select the connected wireless network.

5.png

2-3. Select Details to check whether an IP address is obtained.

6.png

7.png

If the IPV4 address is 192.168.0.*, the default gateway of IPV4 is 192.168.0.1, indicating that the login address of the router is 192.168.0.1.

If the IPV4 address is 192.168.1.*, the default gateway of IPV4 is 192.168.1.1, indicating that the login address of the router is 192.168.1.1.

If the IP is not available, you can disconnect the signal and reconnect it. If it is still invalid, you can restore the router to the factory and check the IP address obtained after the connection signal.

Note: Before this, please confirm that your computer is selected to "acquire IP address automatically".

 

For the setting method of the computer automatically obtaining the IP address, refer to the following figure (take win10 system as an example).

8.png

Obtain the login address of the router through your mobile phone.

STEP-1: The wireless signal that the phone connects to the router. (The back sticker has the factory default wireless signal name)

 

STEP-2: Select your phone's wireless network settings to check if you have an IP address.

9.png10.png

At this point, the IPV4 address is 192.168.0.*, and the IPV4 default gateway is 192.168.0.1, indicating that the router's login address is 192.168.0.1.

 

STEP-3: Enter 192.168.0.1 in the address bar of the mobile browser.

11.png

STEP-4: If you still can't enter, you can change the browser or a mobile phone or computer through the 192.168.0.1 login interface.

 

STEP-5: If the fourth step is invalid, the router can be reset.

Reset method:

1. Please make sure your router’s power is on regularly, then press the

RST button for about 10s.(The RESET pin should be held with a pointed object such as a paper clip or a pen tip)

2. Loosen the button until your router’s LED lights all flashing, then you

have reset your router to default settings.

10

What if I cannot log into the router's setup page

2875

 Application introduction    

After entering the management address of the router in the address bar of the browser, the management page cannot be displayed, or the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png

    It is suitable for:  All TOTOLINK Router    

If you can’t login the web interface of TOTOLINK, it may be related to factors such as router, line, browser or computer. Please follow the steps below for detailed troubleshooting.


  Set up steps  

STEP-1: Check line connection

The operating computer should be connected to the router and can be connected via a network cable or wirelessly.

Connect through the network cable: Operate the computer and connect to the LAN port of the router, and ensure that the indicator of the computer network cable interface and the corresponding interface of the router is on.

Wireless connection: The wireless terminal needs to connect to the router signal. When the factory setting is set, the router default Wi-Fi name and password are printed on the bottom label of the router.

Note: If the signal of the wireless router is not found, it is recommended to reset the router.

STEP-2: Check computer IP address

If the computer does not specify or obtain the correct IP address, it will be unable to log in to the management interface.

Be sure to set the IP address of the operating computer to be automatically obtained. Take the Windows 10 system wired network card as an example. For the setting method of the computer automatically obtaining the IP address, refer to the following figure.

2.png


STEP-3: Check login address

TOTOLINK router currently has three types of login addresses, and different router addresses may be different:

Management page address: itotolink.net or 192.168.0.1 or 192.168.1.1.

For the specific login address, please check the sticker at the bottom of the router, as shown below (take itotolink.net as an example).

3.png

After confirming the login address, open the browser, clear the address bar and enter the management address, press Enter, as shown below.

4.png

STEP-4: Check login password

If the password input box of the login management interface can be displayed, but the wrong password is entered, the management interface cannot be logged.

Our common default login password prompt box, as shown below.


Login prompt box

Default username

Default password

图片1.png 

admin

(Lower case letters)

admin

(Lower case letters)

Note: If you forget the set or modified management password, you can only restore the factory settings.

STEP-5: Change your browser or computer

A. Change browser and clear browser cache

Try changing your browsers like Google Chrome, Firefox, Internet Explorer, etc., and clear your browser cache.

Delete cookies on the web browser. Here we take Google Chrome for example.

Note: In general, the browser enters the management address of the router and a 404 error pops up. Please use this method first.

5.png

B. Try to log in with your phone

If you are unable to log in using your computer, you can try to change another computer or use your mobile phone to log in to the management interface (using the mobile browser), as shown below, enter itotolink.net as an example.

6.png

STEP-6: Reset router

If you still cannot log into the router's setup page after troubleshooting according to the above methods, it is recommended to restore the factory settings. There are two types of wireless router reset buttons: RESET pin and RESET button. As shown below.

QQ截图20200820160243.png

Reset method:

1. Please make sure your router’s power is on regularly, then press the

RST button for about 10s.(The RESET pin should be held with a pointed object such as a paper clip or a pen tip)

2. Loosen the button until your router’s LED lights all flashing, then you

have reset your router to default settings.

Note: Some wireless routers share a button with RESET.