/themes/my_demo/public/assets/images/s24w1.png

T20

T20 is a smart home Wi-Fi system which includes multiple paired routers working together. All the routers in the system communicate with each other on the 1733Mbps bandwidth and each router delivers wireless tri-band speed up to 3000Mbps. It requires no wiring, but the wireless performance, such as the transmission speed and the stability can be as good as the cable connection. With the mesh wireless network technology, T20 supports to deliver wireless signal to a wider coverage. Meanwhile, T20 supports MU-MIMO technology, delivering wireless signal on 2.4GHz and 5GHz with a combined SSID, easily achieving the seamless roaming.


AC3000 Wireless Tri-Band Router

1733Mbps on 5GHz-1, offer super high speed connection between Master router and Satellite router.

867Mbps on 5GHz, offers super fast wireless speed for Gaming, Video and Download.

400Mbps on 2.4GHz, offers further Wi-Fi coverage for other wireless terminals, as well as strong wall-through ability.


Full Gigabit WAN and LAN Ports 

Equipped with full gigabit ports, T20 offers a larger capability for data streaming via cable connection, making the best use of your Internet bandwidth, and compatible with your 100M/1000M network card. 


Intelligent Synchronization on Configuration 

Satellite T20 will copy the configurations from the Master T20 automatically, such as Wireless SSID/Password, working Mode, Bandwidth, Advance Settings and so on.


Support IPTV

With top-level configurations on hardware, T20 supports much powerful applications on firmware. IPTV is one of the most useful features for the users, which brings very good experience on Wi-Fi and Multi-media.


Wave2 MU-MIMO and Beamforming technology

With the latest Wave2 MU-MIMO and Beamforming technology, T20 supports to communicate with multiple devices at the same time and supports to transmit the signal to the wireless connected devices intensively, such as smart phones, tablets and laptops, thus improving the bandwidth efficiency and the Wi-Fi experience.


A combined SSID for 2.4GHz and 5GHz, supporting seamless wireless roaming

With a combined SSID for 2.4GHz and 5GHz, T20 supports to choose which band to connect with your devices, ensuring you are always connecting with the best Wi-Fi. And the seamless roaming function supports to keep your devices always connected even when you are moving, as long as you are within the wireless coverage.


Easy setup, requires no complicated configurations 

T20 is a smart home Wi-Fi system packing as a suit. Master router and satellite router have been paired successfully as the factory default setting. It requires no complicated configurations, just several steps to create a smart home Wi-Fi system.


- Delivers speeds up to 1200Mbps (5GHz 867Mbps + 2.4GHz 300Mbps)

- Complies with the 802.11ac Wi-Fi standard

- 802.3af/at compliant PoE for simple deployment and low cost

- Handles up to 128 Wi-Fi connections simultaneously

- Two options, local device management and remote AC central control, are available 

- Provides 64/128-bit WEP, WPA, and WPA2

- Supports Multiple SSIDs, WDS, Universal Repeater, and Wireless Scheduler


Hardware

Interface

Master T20

- 2* 1000Mbps LAN Ports

- 1* 1000Mbps WAN Port

- 1* USB2.0 Port


Satellite T20

- 3* 1000Mbps LAN Ports

- 1* USB2.0 Port

Power Supply

- 12VDC/3.5A 

Button

- 1* Syn Button

- 1* RST Button

- 1* Power Button

LED  Indicators

Master T20

- 1* System

- 1* WAN

- 2* LAN


Satellite T20

- 1* System

- 3* LAN

Antenna

- Internal Antennas

Dimensions (L x W x H)

- 120 x 180 x 256mm
Wireless

Standards

- IEEE 802.11ac,

- IEEE 802.11n,

- IEEE 802.11g,

- IEEE 802.11b,

- IEEE 802.11a ,

- IEEE802.11s

RF Frequency - 2.4GHz/5GHz
Data Rate - 2.4GHz: Up to 400Mbps

- 5GHz: Up to 867Mbps

- 5GHz-1: Up to 1733Mbps

EIRP

- 2.4GHz < 20dBm

- 5GHz < 20dBm 

Wireless Security

- 64/128-bit WEP, WPA, WPA2 and WPA-PSK,

   WPA2-PSK 

Reception Sensitivity - 2.4G: 11b: <-81dbm;

            11g: <-68dbm;

            11n: HT20<-65dbm  HT40: <-62dbm

- 5G: 11a:<-68dbm;

         11n: HT20<-65dbm  HT40: <-62dbm 

         11ac: <-51dbm

Software
Operation Mode - Mesh Networking Mode
Network

- Static DHCP Setting

- IPTV

WAN Type

- DHCP

- Static IP

- PPPoE

Wireless Functions

- Multiple APs

- MAC Authentication

- WMM

Schedule

- Reboot Schedule

- Wireless Schedule

QoS

- QoS Setup

- Connect Limit Control

Firewall

- IP/Port Filtering

- MAC Filtering

- URL Filtering

- Port Forwarding

- VPN Passthrough

- DMZ

USB Storage

- Samba

Management

- Administrator Setting

- Time Setting

- DDNS

- Remote Management

- UPnP

- Upgrade Firmware

- System Configuration

- System Log, and more

Others
Package Contents - T20 Wireless Router *2

- Power Adapter *2

- Ethernet Cable *2

- Quick Installation Guide *1

Environment

- Operating Temperature: 0℃~50℃ (32 ℉~122℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing


No

Title

Views
1

How to setup TOTOLINK Router on App

468


     It is suitable for: TOTOLINK router

Application introduction:

This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.

 

 Set up steps 

STEP-1: Follow the steps below to connect your router.

图片55.png 

STEP-2: Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.

图片56.png 

STEP-3: Launch the Tether App on your phone.

 图片57.png

STEP-4: Select your TOTOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.

 图片59.png

STEP-5: Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)

 图片60.png

STEP-6: Quick Setup.

 图片62.png图片64.png


STEP-7: More features: Click Application or Tools.

 图片68.pngSTEP-8: Binding router, remote management. 

图片70.png

2

T20 Quick Installation Guide

83

     It is suitable for: T20

Installation Diagram

 图片1.png

 Interface 

 图片2.png

 Method One: login via tablet/Cellphone 

STEP-1:

Find TOTOLINK_T20 or TOTOLINK_T20_5G on the WLAN list of your Phone, and choose to connect. Then any Web browser on your Phone and enter http://itotolink.net on the address bar.

图片3.png

STEP-2:

Input admin for both User Name and Password on the coming page, then click Login.

图片4.png

STEP-3:

Click Quick Setup on the coming page.

图片5.png 

STEP-4: 

Internet Setting. Choose a suitable WAN Connection type from the list, and fill in the information required.

 图片6.png 

STEP-5: 

Wireless Setting. Create passwords for 2.4G and 5G Wi-Fi (Here users could also revise the default Wi-Fi name) and then click Next.

 图片7.png

STEP-6: 

It takes several seconds to save the settings and then your router will restart automatically. This time your Phone will be disconnected from the router. Please back to the WLAN list of your phone to choose the new Wi-Fi name and input the correct password. Now, you could enjoy the Wi-Fi.

图片8.png

 Method Two: login via PC 

STEP-1:

Connect your computer to the router by cable or wireless. Then run any Web browser and enter http://itotolink.net in the address bar.


STEP-2:

Enter admin for the password and then click LOGIN. 

图片9.png 

STEP-3:

Click Quick Setup. 

图片10.png

图片11.png

3

How to use the router's WPS button?

188

     It is suitable for: All TOTOLINK routers

Application introduction 

This article describes how to quickly make a wireless connection through the router's WPS button.

Diagram

1.png 

Set up steps 

STEP-1:

Please make sure your router has WPS button before setting.

Please make sure your wireless client supports WPS functionality before setting.

 

STEP-2:

Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.

2-1. RST/WPS button

2.png 

2-2. WPS button:

QQ截图20200821135919.png 

Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.

 

STEP-3:

After pressing the WPS button, use wireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example. As shown below.

3-1. Computer wireless connection:

3.png 

3-2. Mobile phone  wireless connection:

4.png

4

How to login to router by manually configuring IP?

343

     It is suitable for: All TOTOLINK routers

Set up steps 

STEP-1: Connect your computer

Connect to the router's LAN port with a network cable from a computer network port (or to search for and connect the  router's wireless signal).

 

STEP-2: Assigned manually IP Address

2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.

1.png 

 

2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.

2.png 

STEP-3: Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example.

3.png 

STEP-4: After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.

4.png 

Note: Your terminal device must choose to obtain an IP address automatically to access the network.

5

Introduction to the four Operation Mode of the router

262

     It is suitable for: All TOTOLINK routers

Application introduction 

This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.

 

 Set up steps 

STEP-1: Router Mode(Gateway mode)

Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.

1.png 

STEP-2: Repeater mode

Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.

2.png 

STEP-3: AP mode(Bridge mode)

AP mode, the router acts as a wireless switch, you can transfer the superior's AP/Router wired signal into wireless signal.

3.png 

STEP-4: WISP Mode

WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.

4.png

 

 FAQ Common problem 

Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?

A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.

 

Q2: How to enter the router management interface in AP mode/Repeater mode?

A: Refer to FAQ#How to login to router by manually configuring IP

6

What if the Router can't log in to the new Chrome?

167

     It is suitable for: All TOTOLINK Router

Application introduction 

After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png


Method One: login via PC 

STEP-1: Change browser and clear browser cache

Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache. 2.png

Delete cookies on the web browser. Here we take Firefox for example.

Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.

3.png 

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

4.png 

 

 Method Two: login via tablet/Cellphone 

STEP-1: Change browser and clear browser cache

Try other browser, such as Firefox, Opera, etc., and clear your browser cache.

5.png

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

6.png

7

How to properly download upgrade firmware of router?

175

     It is suitable for: All TOTOLINK routers

 Preparation 

Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade. 

Wrong firrmware version may damage your device and no warrante.


 Set up steps 

STEP-1: Guide for Hardware Version

For most TOTOLINK routers, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example N300RT) and ended with Hardware Version (for example V2.0) is the serial number of your device. See below:

1.png 

STEP-2:

Open browser, enter www.totolink.net. Download the required files.

For example, if your hardware version is V2.0 , please download V2 version.

Note: If the hardware version is V1, V1 will be hidden.

2.png 

 

STEP-3:

Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)

3.png

8

How do I get the login address of my router

452

    It is suitable for:  All TOTOLINK Router  


    Method One:  

Check the label on the bottom of the router to get the login address of the router, as shown below.

QQ截图20200820163526.png


   Method Two:  

Obtain the login address of the router through the computer (take win10 system as an example).

STEP-1: 

The computer connects to the wireless signal of the router. (The back sticker has the factory default wireless signal name)

STEP-2: 

2-1. Click on wireless icon at the bottom right corner on the screen, Select Network & Internet settings.

4.png

2-2. Select the connected wireless network.

5.png

2-3. Select Details to check whether an IP address is obtained.

6.png

7.png

If the IPV4 address is 192.168.0.*, the default gateway of IPV4 is 192.168.0.1, indicating that the login address of the router is 192.168.0.1.

If the IPV4 address is 192.168.1.*, the default gateway of IPV4 is 192.168.1.1, indicating that the login address of the router is 192.168.1.1.

If the IP is not available, you can disconnect the signal and reconnect it. If it is still invalid, you can restore the router to the factory and check the IP address obtained after the connection signal.

Note: Before this, please confirm that your computer is selected to "acquire IP address automatically".

 

For the setting method of the computer automatically obtaining the IP address, refer to the following figure (take win10 system as an example).

8.png

Obtain the login address of the router through your mobile phone.

STEP-1: The wireless signal that the phone connects to the router. (The back sticker has the factory default wireless signal name)

 

STEP-2: Select your phone's wireless network settings to check if you have an IP address.

9.png10.png

At this point, the IPV4 address is 192.168.0.*, and the IPV4 default gateway is 192.168.0.1, indicating that the router's login address is 192.168.0.1.

 

STEP-3: Enter 192.168.0.1 in the address bar of the mobile browser.

11.png

STEP-4: If you still can't enter, you can change the browser or a mobile phone or computer through the 192.168.0.1 login interface.

 

STEP-5: If the fourth step is invalid, the router can be reset.

Reset method:

1. Please make sure your router’s power is on regularly, then press the

RST button for about 10s.(The RESET pin should be held with a pointed object such as a paper clip or a pen tip)

2. Loosen the button until your router’s LED lights all flashing, then you

have reset your router to default settings.

9

What if I cannot log into the router's setup page

4059

 Application introduction    

After entering the management address of the router in the address bar of the browser, the management page cannot be displayed, or the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png

    It is suitable for:  All TOTOLINK Router    

If you can’t login the web interface of TOTOLINK, it may be related to factors such as router, line, browser or computer. Please follow the steps below for detailed troubleshooting.


  Set up steps  

STEP-1: Check line connection

The operating computer should be connected to the router and can be connected via a network cable or wirelessly.

Connect through the network cable: Operate the computer and connect to the LAN port of the router, and ensure that the indicator of the computer network cable interface and the corresponding interface of the router is on.

Wireless connection: The wireless terminal needs to connect to the router signal. When the factory setting is set, the router default Wi-Fi name and password are printed on the bottom label of the router.

Note: If the signal of the wireless router is not found, it is recommended to reset the router.

STEP-2: Check computer IP address

If the computer does not specify or obtain the correct IP address, it will be unable to log in to the management interface.

Be sure to set the IP address of the operating computer to be automatically obtained. Take the Windows 10 system wired network card as an example. For the setting method of the computer automatically obtaining the IP address, refer to the following figure.

2.png


STEP-3: Check login address

TOTOLINK router currently has three types of login addresses, and different router addresses may be different:

Management page address: itotolink.net or 192.168.0.1 or 192.168.1.1.

For the specific login address, please check the sticker at the bottom of the router, as shown below (take itotolink.net as an example).

3.png

After confirming the login address, open the browser, clear the address bar and enter the management address, press Enter, as shown below.

4.png

STEP-4: Check login password

If the password input box of the login management interface can be displayed, but the wrong password is entered, the management interface cannot be logged.

Our common default login password prompt box, as shown below.


Login prompt box

Default username

Default password

图片1.png 

admin

(Lower case letters)

admin

(Lower case letters)

Note: If you forget the set or modified management password, you can only restore the factory settings.

STEP-5: Change your browser or computer

A. Change browser and clear browser cache

Try changing your browsers like Google Chrome, Firefox, Internet Explorer, etc., and clear your browser cache.

Delete cookies on the web browser. Here we take Google Chrome for example.

Note: In general, the browser enters the management address of the router and a 404 error pops up. Please use this method first.

5.png

B. Try to log in with your phone

If you are unable to log in using your computer, you can try to change another computer or use your mobile phone to log in to the management interface (using the mobile browser), as shown below, enter itotolink.net as an example.

6.png

STEP-6: Reset router

If you still cannot log into the router's setup page after troubleshooting according to the above methods, it is recommended to restore the factory settings. There are two types of wireless router reset buttons: RESET pin and RESET button. As shown below.

QQ截图20200820160243.png

Reset method:

1. Please make sure your router’s power is on regularly, then press the

RST button for about 10s.(The RESET pin should be held with a pointed object such as a paper clip or a pen tip)

2. Loosen the button until your router’s LED lights all flashing, then you

have reset your router to default settings.

Note: Some wireless routers share a button with RESET.

10

How to manually set an IP address

941


     It is suitable for: All TOTOLINK routers


Application:This article will illustrate way to manually set an IP address on Windows 10/Mobile phone..


Manually set IP address on Windows 10

    Set up steps    

1-1. Find the small computer icon in the lower right corner of your computer desktop1.png,click on “Network & Internet settings”.

2.png

1-2. Pop up the Network & Internet Center interface, click on “Change adapter options” under Related settings.

3.png

1-3. After open changing adapter options,find Ethernet,click and select Properties.(If you want to check the wireless IP address, find WLAN)

4.png

1-4. Select “Internet Protocol Version 4 (TCP/IPv4),click on “Properties”.

5.png

1-5. To manually set IP address, select “Use the following IP address”, set the IP address and subnet mask; Finally click on “ok”.Take the IP address 192.168.0.10 as an example.


6.png

1-6. When you don't need to set the IP address manually, Please select Obtain an IP address automatically and Obtain DNS Server address automatically.

 7.png


Manually set IP address on Mobile phone

 









    Set up steps    

1-1. Click Settings on the screen-> Wireless Network (or Wi-Fi), click on the exclamation mark behind the wireless signal.

8.png


Note: Before manually set IP address , make sure the wireless terminal is currently connected or is connecting to the wireless signal.

1-2. Click Static, enter the corresponding parameters in the IP address, gateway, and network mask positions, and click Save. Take the IP address 192.168.0.10 as an example.


9.png


1-3. When you don't need to set the IP address manually, Please turn off static IP.

10.png