/themes/my_demo/public/assets/images/s24w1.png

EX1200L

EX1200_640_01.jpgEX1200_640_02.jpgEX1200_640_03.jpgEX1200_640_04.gifEX1200_640_05.gifEX1200_640_06.gifEX1200_640_07.jpgEX1200_640_08.jpgEX1200_640_09.gifEX1200_640_10.jpg

- Eliminates dead zones with strong Wi-Fi expansion at combined speed of up to 1.2Gbps.

- Delivers over both the 2.4GHz band(300Mbps) and 5GHz band(867Mbps) for more stable and fast wireless experience.

- Intelligent screen helps to find the best spot to set up by showing the connection status and signal strength.

- Two high-gain external antennas increase the effective Wi-Fi coverage as well as enhance the reception and transmission stability.

- Ethernet port for Reliable Wired Connection.

- Supports WPS (Wi-Fi Protected Setup) Wi-Fi extension. 

- Supports quick setup on Phone UI.

- Supports Access Point Mode.

Hardware

Interface

- 1*10/100BaseTX(Auto MDI/MDIX)LAN Port

Power Supply

- AC 100-240V 50/60Hz 0.1A (built-in power module)

Display

- 1*OLED (0.96’’ 128*64 Dots)

Antenna

- 2*5dBi External Antennas

Button

- 1*MENU/RST Button,
- 1*Menu Button(Up),
- 1*Menu Button(Down)

LED  Indicators

- 1 *SYS (Blue)

Dimensions (W x L x H)

- CN/US Standard: 121*82*52.7MM

- UK Standard: 121*82*59.2MM

- EUR Standard: 121*82*74.5MM

Wireless

Standards 

- IEEE 802.11ac,

- IEEE 802.11a,

- IEEE 802.11b,

- IEEE 802.11g ,

- IEEE 802.11n

RF Frequency

- 2.4GHz/5GHz

Data Rate - 2.4GHz: 300Mbps

EVM

(Error Vector Magnitude)

- 11b:<-10dB

- 11g/a:<-25dB

- 11n:<-28dB

- 11ac:<-32dB

Wireless Security

- 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK

Tx power

- 2.4G:

  11b: 11M 20±1.5dBm;

  11g: 54M 16±1.5dBm;

  11n: MCS7 HT20 17±1.5dBm;

          MCS7 HT40 17±1.5dBm;

- 5G:

  11a: 54M 15±2dBm;

  11n: MCS7 HT20 14±2dBm;

          MCS7 HT40 14±2dBm;

  11ac: MCS9 VHT80 13.5±2dBm.

Rx sensitivity - 2.4G:

  11b : -81dBm,

  11g : -68dBm,

  11n : HT20 -65dBm,

           HT40 -62dBm

- 5G:

  11ac : -51dBm,

  11a : -68dBm,

  11n : HT20 -65dBm,

           HT40 -62dBm

Others

Package Contents

- EX1200L AC1200 Dual Band Wi-Fi Smart Screen Display Extender *1

- Quick Installation Guide *1

Environment

- Operating Temperature: 0℃~50℃ (32 ℉~122℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 5%~95% non-condensing

- Storage Humidity: 5%~95% non-condensing


  • 1

  • 2

No

Title

Views
1

How to login to extender by manually configuring IP?

66

     It is suitable for: All TOTOLINK Extender

Set up steps 

STEP-1: Connect your computer

Connect to the extender's LAN port with a network cable from a computer network port (or to search for and connect the  extender's wireless signal).

 

STEP-2: Assigned manually IP Address

TOTOLINK extender’s LAN IP address is 192.168.0.254, please type in IP address 192.168.0.x (“x” range from 2 to 250), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.254.

图片1.png

 

STEP-3: Enter 192.168.0.254 into the TOTOLINK extension in your browser. Take the EX200 as an example.

 图片2.png

STEP-4: After setting up the extender successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.

图片3.png 

Note: Your terminal device must choose to obtain an IP address automatically to access the network.

2

What if the Extender can't log in to the new Chrome?

73

     It is suitable for: All TOTOLINK Extender

Application introduction 

After entering the management address of the extender in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png

Take EX200 as an example.

 Method One: login via PC 

STEP-1: Change browser and clear browser cache

Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache.

2.png

Delete cookies on the web browser. Here we take Firefox for example.

Note: In general, the browser enters the management address of the extender and error pops up. Please use this method first.

3.png 

STEP-2: 

2-1. Extender default Gateway IP address 192.168.0.254:

Assigned manually IP address 192.168.0.x “x” range from 2 to 253, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.254.

4.png 

2-2. Enter 192.168.0.254 into the address bar of your browser. Log in the settings interface.

5.png 

2-3. After setting up the extender successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.

6.png 

 

 Metod Two: login via tablet/Cellphone 

STEP-1: Change browser and clear browser cache

Try other browser, such as Firefox, Opera, etc., and clear your browser cache.

 7.png

STEP-2: Enter 192.168.0.254 into the address bar of your browser. Log in the settings interface.

8.png

3

How to properly download upgrade firmware of extender?

70

     It is suitable for: All TOTOLINK extenders

 Preparation 

Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade. 

Wrong firrmware version may damage your device and no warrante.


 Set up steps 

STEP-1: Guide for Hardware Version

For most TOTOLINK extender, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example EX200) and ended with Hardware Version (for example V1.0) is the serial number of your device. See below:


1.png 

STEP-2:

Open browser, enter www.totolink.net  Download the required files.

For example, if your hardware version is V2.0 , please download V2 version.

Note: If the hardware version is V1, V1 will be hidden.

2.png 

 

STEP-3:

Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)

3.png