/themes/my_demo/public/assets/images/s24w1.png

A702R_V2

A702R_V2_640_01.jpgA702R_V2_640_02.jpgA702R_V2_640_03.jpgA702R_V2_640_04.jpgA702R_V2_640_05.jpgA702R_V2_640_06.jpg

- Complies with the latest IEEE 802.11ac standards.

- 1167Mbps on simultaneous dual band, 867Mbps on 5GHz and 300Mbps on 2.4GHz 

- Beamforming technology allows to intensively transmit the signal to the wireless connected devices, 

   improving the wireless transmitting efficiency and Wi-Fi experience.

- Supports DHCP, Static IP, PPPoE connection mode.

- Provides 64/128-bit WEP, WPA, WPA2, WPA-PSK, WPA2-PSK encryption.

- Supports IP address filtering, port filtering, MAC filtering, URL filtering and port forwarding. 

- Multiple SSIDs are convenient for Internet access management.

- Smart UI design is easy for the users to finish the basic configuration on their cellphones.

- IPTV function allows to enjoy online movies at home conveniently.

Hardware

Interface

- 4 *100Mbps LAN Ports

- 1 *100Mbps WAN Port

Power Supply 9VDC/0.8A 
Button

- 1 *RST Button   

- 1* WPS Button

LED Indicators


- 1*Power, 

- 1*CPU, 

- 1*5G, 

- 1*2.4G, 

- 4*LAN, 

- 1*WAN 

Antenna

- 2 * 2.4GHz fixed antennas(5dBi), 

- 2 * 5GHz fixed antennas(5dBi), White color

Dimensions (L x W x H)

- 174 X 128 X 26mm (not including antennas)

 

Wireless

Standards

- IEEE 802.11ac , 

- IEEE 802.11a , 

- IEEE 802.11b , 

- IEEE 802.11g ,

- IEEE 802.11n , 

RF Frequency

- 2.4GHz/5GHz

Data Rate

- 2.4GHz: Up to 300Mbps

- 5GHz: Up to 867Mbps

EIRP

- 2.4GHz < 20dBm

- 5GHz < 20dBm 

Wireless Security

- WPA/WPA2 Mixed  

Reception Sensitivity

- 2.4G: 11b: <-81dbm;

            11g: <-68dbm;

            11n: HT20<-65dbm  HT40: <-62dbm

- 5G: 11a:<-68dbm;

         11n: HT20<-65dbm  HT40: <-62dbm 

         11ac: <-51dbm

 

Software 

Operation Mode

- Router Mode           

- Repeater Mode

- AP Mode                 

- WISP Mode

Network

- WAN Setting            

- LAN Setting              

- IPTV  Setting

- DHCP&ARP Tables 

- Static Route             

- Routing Table

- IPv6 Network            

- DDNS

WAN Type

- Static IP, 

- DHCP, 

- PPPoE/Russia PPPoE, 

- PPTP/Russia PPTP, 

- L2TP/Russia L2TP

Home


- Easy setup              

- Basic setup               

- Advanced setup

- QR Code                 

- LED                          

- Logout   

- Reboot

Wireless

- Basic Settings          

- Advanced Settings  

- Access Control     

- WDS Settings          

- WPS Settings          

- Wireless Schedule

- Guest Network(Multiple SSID)

Parental controls

- Internet time control based on MAC          

- URL Restrictions

QoS

- Up/Down speed control on WAN, 

- Bandwidth control based on IP address

Firewall


- Virtual Server(Port Forwarding)              

- DMZ    

- VPN passthrough

NAT Mapping

- Samba

System

- Upgrade Firmware   

- Time Zone Settings   

- TR-069 Config

- Password Settings   

- Reboot Schedule       

- System Log and so on

 

Others

Package Contents

- A702R Wireless Router * 1

- Power Adapter * 1

- Ethernet Cable * 1

- Quick Installation Guide * 1

Environment

- Operating Temperature: 0℃~50 ℃ (32 ℉~122℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing

  • 1

  • 2

No

Title

Views
1

How to setup TOTOLINK Router on App

468


     It is suitable for: TOTOLINK router

Application introduction:

This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.

 

 Set up steps 

STEP-1: Follow the steps below to connect your router.

图片55.png 

STEP-2: Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.

图片56.png 

STEP-3: Launch the Tether App on your phone.

 图片57.png

STEP-4: Select your TOTOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.

 图片59.png

STEP-5: Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)

 图片60.png

STEP-6: Quick Setup.

 图片62.png图片64.png


STEP-7: More features: Click Application or Tools.

 图片68.pngSTEP-8: Binding router, remote management. 

图片70.png

2

A702R Quick Installation Guide

575

     It is suitable for: A702R

Installation Diagram

 图片13.png

 Interface 

 图片14.png

 Method One: login via tablet/Cellphone 

STEP-1:

Find TOTOLINK_A702R or TOTOLINK_A702R_5G on the WLAN list of your Phone, and choose to connect. Then any Web browser on your Phone and enter http://itotolink.net on the address bar.

图片15.png

STEP-2:

Input admin for both User Name and Password on the coming page, then click Login.

图片16.png

STEP-3:

Click Quick Setup on the coming page.

 图片17.png

STEP-4: 

Internet Setting. Choose a suitable WAN Connection type from the list, and fill in the information required.

图片19.png

STEP-5: 

Wireless Setting. Create passwords for 2.4G and 5G Wi-Fi (Here users could also revise the default Wi-Fi name) and then click Next.

 图片20.png

STEP-6: 

It takes several seconds to save the settings and then your router will restart automatically. This time your Phone will be disconnected from the router. Please back to the WLAN list of your phone to choose the new Wi-Fi name and input the correct password. Now, you could enjoy the Wi-Fi.

图片21.png

 Method Two: login via PC 

STEP-1:

Connect your computer to the router by cable or wireless. Then run any Web browser and enter http://itotolink.net in the address bar.


STEP-2:

Set a new login password for the device, it is recommended to set the password with alphanumeric characters and then press Install.

图片22.png

STEP-3:

Enter admin for User name, then enter new password in step 2 or admin, type the verification code then press LOGIN.

图片23.png


STEP-4:

Click on "Auto Detect" to detect the Wan Type in your network.

0图片1.png

STEP-5:

Now you can see the Easy Setup page. All basic settings could be done here, including Internet Settings and Wireless Settings.

图片24.png

3

A3002RU TR069 Configuration

273

     It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus,  A702R, A3002RU

Application introduction: This tutorial will show you how to configure TR069 feature on TOTOLINK Router devices.

Setup steps

STEP-1: Install router as the following diagram

The router WAN IP and TR069 server IP must be on the same network segment or can access each other; TR069 server needs to turn off the firewall and other functions.

 图片9.png

STEP-2: Login router

Access Login page (Default IP: 192.168.0.1) and then you need enter the Administrator information (Default ID and Password is admin).

图片10.png 

STEP-3: WAN settings

Go to the Advanced Setting page, setup the WAN information.

图片11.png 

STEP-4: TR069 settings

Next, setup the TR069 information.

图片12.png

R069 – Connection Information

QQ截图20200821173918.png

4

How to set up static DHCP

211

     It is suitable for: N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus, A702R, A850R, A3002RU

Set up steps 

STEP-1: Connect your computer

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

图片1.jpg

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

图片2.png 

STEP-3:

Enter advanced settings to select the LAN settings in Network,click the Set Static DHCP.

图片7.png 

STEP-4:

Checklist the Enable Static DHCP to open the setting,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.

图片8.png

5

How to use the router's WPS button?

188

     It is suitable for: All TOTOLINK routers

Application introduction 

This article describes how to quickly make a wireless connection through the router's WPS button.

Diagram

1.png 

Set up steps 

STEP-1:

Please make sure your router has WPS button before setting.

Please make sure your wireless client supports WPS functionality before setting.

 

STEP-2:

Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.

2-1. RST/WPS button

2.png 

2-2. WPS button:

QQ截图20200821135919.png 

Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.

 

STEP-3:

After pressing the WPS button, use wireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example. As shown below.

3-1. Computer wireless connection:

3.png 

3-2. Mobile phone  wireless connection:

4.png

6

How to login to router by manually configuring IP?

343

     It is suitable for: All TOTOLINK routers

Set up steps 

STEP-1: Connect your computer

Connect to the router's LAN port with a network cable from a computer network port (or to search for and connect the  router's wireless signal).

 

STEP-2: Assigned manually IP Address

2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.

1.png 

 

2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.

2.png 

STEP-3: Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example.

3.png 

STEP-4: After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.

4.png 

Note: Your terminal device must choose to obtain an IP address automatically to access the network.

7

Introduction to the four Operation Mode of the router

262

     It is suitable for: All TOTOLINK routers

Application introduction 

This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.

 

 Set up steps 

STEP-1: Router Mode(Gateway mode)

Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.

1.png 

STEP-2: Repeater mode

Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.

2.png 

STEP-3: AP mode(Bridge mode)

AP mode, the router acts as a wireless switch, you can transfer the superior's AP/Router wired signal into wireless signal.

3.png 

STEP-4: WISP Mode

WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.

4.png

 

 FAQ Common problem 

Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?

A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.

 

Q2: How to enter the router management interface in AP mode/Repeater mode?

A: Refer to FAQ#How to login to router by manually configuring IP

8

What if the Router can't log in to the new Chrome?

167

     It is suitable for: All TOTOLINK Router

Application introduction 

After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png


Method One: login via PC 

STEP-1: Change browser and clear browser cache

Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache. 2.png

Delete cookies on the web browser. Here we take Firefox for example.

Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.

3.png 

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

4.png 

 

 Method Two: login via tablet/Cellphone 

STEP-1: Change browser and clear browser cache

Try other browser, such as Firefox, Opera, etc., and clear your browser cache.

5.png

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

6.png

9

How to set up Port Forwarding on Old User Interface?

221

     It is suitable for: N100RE, N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus, A702R, A850R, A3002RU

 Application introduction 

By port forwarding, the data for Internet applications can pass through the firewall of the router or gateway. This article will show you how to forward ports on your router, take N100RE as an example.

Set up steps 

STEP-1:

In the left menu of the web interface, click Firewall ->Port Forwarding ->Enable.

1.png 

STEP-2:

Choose the Rule Type from the drop-down list, and then fill in the blank as below, and then click Apply.

--IP Address: IP address of the server

--Internal Port: Actual port of the server

--External Portnternal Port: Port to access the server

--Remote IP Address: Suggested blank

--Comment: Set a name for rule (e.g. totolink)

2.png 

 STEP-3:

Ensure that the port successfully added to the Current Port Forwarding List.

3.png 

The router's port forwarding settings are complete

Here with FTP server as an example (WIN10), check that the port forwarding is successfully.

1. Open the Control Panel\All Control Panel Items\Administrative Tools\Add FTP Server

4.png 

2. Input the ftp site name, Select the path; Click next

5.png 

3. Select the target PC address,Sets the port, Click Next;

6.png 

4. Define users and permissions, Click Finish.

7.png 

5. Now, you can access FTP over a LAN, Login Address:ftp://192.168.0.242;

 8.png

6. Check ROUTER WAN IP, in the public network use it to log into the FTP Server

E. g  ftp://113.90.122.205:21;

   9.png

Normal visit, verify that the port forwarding OK

10

How to properly download upgrade firmware of router?

175

     It is suitable for: All TOTOLINK routers

 Preparation 

Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade. 

Wrong firrmware version may damage your device and no warrante.


 Set up steps 

STEP-1: Guide for Hardware Version

For most TOTOLINK routers, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example N300RT) and ended with Hardware Version (for example V2.0) is the serial number of your device. See below:

1.png 

STEP-2:

Open browser, enter www.totolink.net. Download the required files.

For example, if your hardware version is V2.0 , please download V2 version.

Note: If the hardware version is V1, V1 will be hidden.

2.png 

 

STEP-3:

Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)

3.png