/themes/my_demo/public/assets/images/s24w1.png

CP450L

CP450L_01.jpgCP450L_02.gifCP450L_03.gifCP450L_04.jpgCP450L_05.jpgCP450L_06.jpg

- Complies with the latest IEEE11ac standards, delivering 5G wireless speed up to 450Mbps.

- Built-in 12dBi high-gain polarized antennas, transmits wireless signal further and stronger.

- professional protection design on shell, suitable for any kinds of severe environment.

- IP65 level dust-proof and water-proof, 4KV lighting-proof and 15KV ESD static electricity-proof.

- Supports automatically pairing after getting power supply. (Double packed version)

- Supports Passive PoE power supply, transmitting distance can be far as 60 meters, more flexible for cabling deployment.

- Supports DC power supply, requiring no additional PoE equipment and reducing the installation cost.

- 4 intelligent LED indicators intuitively show signal strength.

Hardware

Interface


- 1 *10/100Mbps Port (WAN/LAN, Passive PoE in)

- 1 *10/100Mbps Port (LAN, Passive PoE in)

- 1*Power Port

Power Supply

- 24V Passive PoE / 12VDC/2A

- Voltage range: 12-24VDC

Button - 1 *RESET Button
Antenna

- 1*Built-in 12dBi dual polarized antennas

LED Indicators

- 1 *MODE, 

- 1 *Power, 

- 1 *WAN/LAN, 

- 1 *LAN, 

- 4 *Signal Strength

Dimensions(L X W X H)

- 237.5 x 79 x 58.5mm

Wireless

Standards

- IEEE 802.11n, 

- IEEE 802.11g, 

- IEEE 802.11b, 

- IEEE 802.3, 

- IEEE 8.3, 

- IEEE 8.3ab, 

- IEEE 8.3at

RF Frequency

- 5.15~5.825GHz
Data Rate

- Up to 450Mbps

EIRP

- < 20dBm

Wireless Security

- 64/128-bit WEP, WPA/WPA2/WPA-PSK/WPA2-PSK

Reception Sensitivity

- 11n(HT20): -65 dBm@10% PER

- 11n(HT40): -62 dBm@10% PER

- 11a: -68 dBm@10% PER

- 11ac(VHT80): -51 dBm@10% PER

Software

Operation Mode

- Point-to-point

- Point-to-multipoint

MIMO Type

- 5G 1Tx-1Rx

Management

- Save/Reset Settings,

- Firmware upgrade,

- System Log

Others

Package Contents

- CP450L Wireless CPE *1

- Power Adapter *1

- User Guide *1

- Ethernet Cable *1

- Strips*2

Environment

- Operating Temperature: -40℃~70℃ (-40 ℉~158℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing

  • 1

No

Title

Views
1

What if the CPE can't log in to the new Chrome?

58

     It is suitable for: All TOTOLINK CPE

Application introduction 

After entering the management address of the CPE in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png


 Set up steps 

STEP-1: Change browser and clear browser cache

Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache. 2.png

Delete cookies on the web browser. Here we take Firefox for example.

Note: In general, the browser enters the management address of the CPE and error pops up. Please use this method first.

图片1.png 

STEP-2: Take CP900 as an example

2-1. CP900 default Gateway IP address 192.168.0.254:

Assigned manually IP address 192.168.0.x “x” range from 2 to 253, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.254.

3.png 

2-2. Enter 192.168.0.254 into the address bar of your browser. Log in the settings interface.

4.png 

[Note]: 

The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

2

How to properly download upgrade firmware of CPE?

75

     It is suitable for: All TOTOLINK CPE

 Preparation 

Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade. 

Wrong firrmware version may damage your device and no warrante.


 Set up steps 

STEP-1: Guide for Hardware Version

For most TOTOLINK CPE, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example CP300) and ended with hardware Version (for example V2.0) is the serial number of your device. See below:


1.png 

STEP-2:

Open browser, enter www.totolink.net Download the required files.

For example, if your hardware version is V2.0 , please download V2 version.

Note: If the hardware version is V1, V1 will be hidden.

2.png 

 

STEP-3:

Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)

3.png