/themes/my_demo/public/assets/images/s24w1.png

N100RE

N100RE-V3_01.jpgN100RE-V3_02.jpgN100RE-V3_03.jpgN100RE-V3_05.jpgN100RE-V3_06.jpgN100RE-V3_07.jpg

- Complies with IEEE 802.11n/g/b standards for 2.4GHz Wireless LAN.

- Up to 150Mbps data rate for Wi-Fi network. 

- Supports  DHCP, Static IP, PPPoE(dual access), PPTP(dual access), L2TP(dual access) broadband functions.

- Provides 64/128-bit WEP, WPA, WPA2 and WPA-Mixed security.

- Connects to secure network easily and fast using WPS. 

- Supports IP, Port, MAC, URL filtering and Port Forwarding. 

- QoS: Bandwidth Control based on IP/MAC.

- Multi-SSID allows user to create multiple SSIDs according to their needs.

- Supports VLAN function for IPTV and other internet services.

- Universal repeater and WDS function for easy Wi-Fi extension.

- Supports TR-069 protocol for remote centralized management.

HARDWARE FEATURES
Interface

- 2 *10/100Mbps LAN Ports

- 1 *10/100Mbps WAN Port

Power Supply - 9 VDC / 0.5A
Button

- 1 * RST Button

- 1 * WPS Button

LED Indicators

- 1 * CPU

- 1 * Wireless

- 1 * WAN

- 2 * LAN

Antenna

- 1 * 5dBi fixed antennas

Dimensions (L x W x H)

- 3.6 x 3.1 x 1.0 in. ( 91 x 80 x 25 mm)

Wireless

Standards

- IEEE 802.11b

- IEEE 802.11g

- IEEE 802.11n

RF Frequency

- 2.4~2.4835GHz
Data Rate

- 802. 11n: Up to 150Mbps

- 802.11g: Up to 54Mbps (dynamic)

- 802.11b: Up to 11Mbps (dynamic)

EIRP

- < 20dBm

Wireless Security - 64/128-bit WEP, WPA/WPA2 and WPA-Mixed
Reception Sensitivity

- 135M: -65 dBm@10% PER

- 54M: -68 dBm@10% PER

- 11M: -85 dBm@8% PER

- 6M: -88 dBm@10% PER

- 1M: -90 dBm@8% PER

Software

Operation Mode

- Router Mode

- Repeater Mode

- AP Mode

- WISP Mode

Network

- Static DHCP Setting, IPTV

WAN Type - DHCP/Static IP/PPPoE(dual access)/PPTP(dual access) /L2TP

(dual access)

Wireless Functions

- Multiple SSID, 

- Access Control, 

- WDS, 

- WPS

Schedule

- Reboot Schedule

- Wireless Schedule

QoS

- QoS Setup, 

- Connect Limit Control

Firewall

- MAC Filtering, 

- IP/Port Filtering, 

- URL Filtering,  

- Virtual Server(Port Forwarding) , 

- DMZ

System

- Upgrade Firmware, 

- Save/Reload Settings, 

- Time Zone Settings, 

- DDNS, 

- Denial-of-Service, 

- TR-069 Config, 

- Password Settings, 

- System Log, and more

Others
Package Contents

- N100RE Wireless Router *1

- Power Adapter *1

- Ethernet Cable *1

- Quick Installation Guide *1

Environment

- Operating Temperature: 0℃~40℃ (32 ℉~104℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing

  • 1

No

Title

Views
1

How to set up the router to work as a AP mode?

3580
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU

Application introduction:

AP mode,connect the superior AP/Router by wire, you can bridge the superior's AP/Router wired signal into wireless Wi-Fi signals for Wi-Fi devices. Here we take A3000RU for demonstration.

Note: Confirm that your wired network can share the Internet.

Diagram 

1.png

Set up steps 

STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

2.png 

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

 

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

3.png

STEP-3: 

Enter the Advanced Setup page of the router, then follow the steps illustrated.

①Click Operation Mode>②Select AP Mode->③Click Apply button.

4.png

STEP-4:

Next set the wireless SSID and password. Finally click Connect.

5.png

6.png

STEP-5:

Congratulations! Now all your Wi-Fi enabled devices can connect to the customized wireless network.

Note:

After the AP mode is set successfully, you cannot log in to the management page. If you need to make changes, please Reset the router.

2

How to setup TOTOLINK Router on App

4054


     It is suitable for: TOTOLINK router

Application introduction:

This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.

 

 Set up steps 

STEP-1: Follow the steps below to connect your router.

图片55.png 

STEP-2: Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.

图片56.png 

STEP-3: Launch the Tether App on your phone.

 图片57.png

STEP-4: Select your TOTOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.

 图片59.png

STEP-5: Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)

 图片60.png

STEP-6: Quick Setup.

 图片62.png图片64.png


STEP-7: More features: Click Application or Tools.

 图片68.pngSTEP-8: Binding router, remote management. 

图片70.png

3

A3002RU TR069 Configuration

1496

     It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus,  A702R, A3002RU

Application introduction: This tutorial will show you how to configure TR069 feature on TOTOLINK Router devices.

Setup steps

STEP-1: Install router as the following diagram

The router WAN IP and TR069 server IP must be on the same network segment or can access each other; TR069 server needs to turn off the firewall and other functions.

 图片9.png

STEP-2: Login router

Access Login page (Default IP: 192.168.0.1) and then you need enter the Administrator information (Default ID and Password is admin).

图片10.png 

STEP-3: WAN settings

Go to the Advanced Setting page, setup the WAN information.

图片11.png 

STEP-4: TR069 settings

Next, setup the TR069 information.

图片12.png

R069 – Connection Information

QQ截图20200821173918.png

4

How to set up static DHCP?

544

     It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU

Set up steps

STEP-1: Connect your computer

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

图片1.png 

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

图片2.png

STEP-3:

Enter advanced settings to select the LAN settings in Network,click the Set Static DHCP.

图片3.png 

STEP-4:

Checklist the Enable Static DHCP to open the setting,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.

图片4.png

5

How to use the router's WPS button?

1741

     It is suitable for: All TOTOLINK routers

Application introduction 

This article describes how to quickly make a wireless connection through the router's WPS button.

Diagram

1.png 

Set up steps 

STEP-1:

Please make sure your router has WPS button before setting.

Please make sure your wireless client supports WPS functionality before setting.

 

STEP-2:

Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.

2-1. RST/WPS button

2.png 

2-2. WPS button:

QQ截图20200821135919.png 

Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.

 

STEP-3:

After pressing the WPS button, use wireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example. As shown below.

3-1. Computer wireless connection:

3.png 

3-2. Mobile phone  wireless connection:

4.png

6

How to login to router by manually configuring IP?

1444

     It is suitable for: All TOTOLINK routers

Set up steps 

STEP-1: Connect your computer

Connect to the router's LAN port with a network cable from a computer network port (or to search for and connect the  router's wireless signal).

 

STEP-2: Assigned manually IP Address

2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.

1.png 

 

2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.

2.png 

STEP-3: Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example.

3.png 

STEP-4: After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.

4.png 

Note: Your terminal device must choose to obtain an IP address automatically to access the network.

7

Introduction to the four Operation Mode of the router

8814

     It is suitable for: All TOTOLINK routers

Application introduction 

This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.

 

 Set up steps 

STEP-1: Router Mode(Gateway mode)

Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.

1.png 

STEP-2: Repeater mode

Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.

2.png 

STEP-3: AP mode(Bridge mode)

AP mode, the router acts as a wireless switch, you can transfer the superior's AP/Router wired signal into wireless signal.

3.png 

STEP-4: WISP Mode

WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.

4.png

 

 FAQ Common problem 

Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?

A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.

 

Q2: How to enter the router management interface in AP mode/Repeater mode?

A: Refer to FAQ#How to login to router by manually configuring IP

8

What if the Router can't log in to the new Chrome?

1536

     It is suitable for: All TOTOLINK Router

Application introduction 

After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png


Method One: login via PC 

STEP-1: Change browser and clear browser cache

Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache. 2.png

Delete cookies on the web browser. Here we take Firefox for example.

Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.

3.png 

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

4.png 

 

 Method Two: login via tablet/Cellphone 

STEP-1: Change browser and clear browser cache

Try other browser, such as Firefox, Opera, etc., and clear your browser cache.

5.png

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

6.png

9

How to synchronize the router's system time with internet time?

1234

     It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU

Application introduction 

You can maintain the system time by synchronizing with a public time server over the Internet.


Set up steps 

STEP-1:Login to the TOTOLINK router in your browser.

1.png 

STEP-2: In the left menu, click System->Time Zone Setting, follow the steps below.

Time Set Type select

Time Zone select

Enter NTP Server

click Apply

click Update now

2.png 

[Note]:

Before time Zone Setting, you need to confirm that the router is connected to the internet.

10

How to set up Port Forwarding on New User Interface?

3211

     It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU

 Application introduction 

By port forwarding, the data for Internet applications can pass through the firewall of the router or gateway. This article will show you how to forward ports on your router, take N100RE as an example.

Set up steps 

STEP-1:

In the left menu of the web interface, click Firewall ->Virtual Server ->Add.

1.png 

STEP-2:

Choose the Rule Type from the drop-down list, and then fill in the blank as below, and then click Apply.

--Service Type: Click View Existing Servics

--External Port: Port to access the server

--Internal Port: Actual port of the server

--Protocol: IP address of the server

--Service Type: Selectable by TCP, UDP, ALL

 2.png

 

STEP-3:

Ensure that the port successfully added to the Current Port Forwarding List.

3.png 

The router's port forwarding settings are complete

Here with FTP server as an example (WIN10), check that the port forwarding is successfully.

1. Open the Control Panel\All Control Panel Items\Administrative Tools\Add FTP Server

4.png 

2. Input the ftp site name, Select the path; Click next

5.png 

3. Select the target PC address,Sets the port, Click Next;

6.png 

4. Define users and permissions, Click Finish.

7.png 

5. Now, you can access FTP over a LAN, Login Address: ftp://192.168.0.242;

8.png 

6. Check ROUTER WAN IP, in the public network use it to log into the FTP Server

E. g  ftp://113.90.122.205:21;

   9.png

Normal visit, verify that the port forwarding OK