- Complies with IEEE 802.11n/g/b standards for 2.4GHz Wireless LAN.
-“itotolink.net” easy access to the router management interface
- Up to 300Mbps data rate for Wi-Fi network.
- Supports DHCP, Static IP, PPPoE(dual access), PPTP(dual access), L2TP(dual access) broadband functions.
- Provides 64/128-bit WEP, WPA, WPA2 and WPA-Mixed security.
- Connects to secure network easily and fast using WPS.
- Supports IP, Port, MAC, URL filtering and Port Forwarding.
- QoS: Bandwidth Control based on IP/MAC.
- Multi-SSID allows user to create multiple SSIDs according to their needs.
- Supports VLAN function for IPTV and other internet services.
- Supports IPv6 (PPPoE / DHCP / Static IP) protocol(Optional)
- Supports TR-069 protocol for remote centralized management(Optional).
Hardware | |
---|---|
Interface |
- 2 * 10/100Mbps LAN Ports - 1 * 10/100Mbps WAN Port |
Power Supply | - 9V DC / 0.5A |
Button |
- 1 * RST Button - 1 * WPS Button |
LED Indicators |
- 1 *CPU - 1 *Wireless - 1 *WAN - 2 *LAN |
Antenna | - 2 * 5dBi fixed antennas |
Dimensions (L x W x H) | - 3.6 x 3.1 x 1.0 in. ( 91 x 80 x 25 mm) |
Wireless | |
Standards |
- IEEE 802.11b - IEEE 802.11g - IEEE 802.11n |
RF Frequency |
- 2.4~2.4835GHz |
Data Rate | - 2.4GHz: Up to 300Mbps |
EIRP |
- < 20dBm |
Wireless Security | - 64/128-bit WEP, WPA/WPA2 and WPA-Mixed |
Reception Sensitivity |
- 270M: -61 dBm@10% PER - 135M: -65 dBm@10% PER - 54M: -68 dBm@10% PER - 11M: -85 dBm@8% PER - 6M: -88 dBm@10% PER - 1M: -90 dBm@8% PER |
Software | |
Operation Mode |
- Gateway Mode - Repeater Mode - AP Mode - WISP Mode |
Status |
- WAN - Wireless - LAN - System Information |
Network |
- WAN Setting - LAN Setting - IPTV Setting - DHCP&ARP Tables - Static Route - Routing Table |
WAN Type |
- Static IP, - DHCP, - PPPoE/Russia PPPoE, - PPTP/Russia PPTP, - L2TP/Russia L2TP |
IPv6 Protocol | - DHCP/Static IP/PPPoE |
Wireless |
- Basic Settings - Multiple SSID 1 - Multiple SSID 2 - Multiple SSID 3 - Multiple SSID 4 - Advanced Settings - Access Control - WDS Settings - WPS Settings - Wireless Schedule |
QoS |
- Up/Down speed control on WAN, - Bandwidth control based on IP address |
Firewall |
- MAC Filtering - IP/Port Filtering - Virtual Server(Port Forwarding) - URL Filtering - DMZ |
System |
- Upgrade Firmware - Save/Reload Settings - Time Zone Settings - DDNS - Denial-of-Service - TR-069 Config - Password Settings - Reboot Schedule - System Log - Statistics - Run Command - Logout |
Others | |
Package Contents |
- N200RE Wireless Router *1 - Power Adapter *1 - Ethernet Cable *1 - Quick Installation Guide *1 |
Environment |
- Operating Temperature: 0℃~40℃ (32 ℉~104℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 10%~90% non-condensing - Storage Humidity: 5%~90% non-condensing |
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU |
Application introduction:
AP mode,connect the superior AP/Router by wire, you can bridge the superior's AP/Router wired signal into wireless Wi-Fi signals for Wi-Fi devices. Here we take A3000RU for demonstration.
Note: Confirm that your wired network can share the Internet.
Diagram
Set up steps
STEP-1:
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3:
Enter the Advanced Setup page of the router, then follow the steps illustrated.
①Click Operation Mode>②Select AP Mode->③Click Apply button.
STEP-4:
Next set the wireless SSID and password. Finally click Connect.
STEP-5:
Congratulations! Now all your Wi-Fi enabled devices can connect to the customized wireless network.
Note:
After the AP mode is set successfully, you cannot log in to the management page. If you need to make changes, please Reset the router.
It is suitable for: TOTOLINK router |
Application introduction:
This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.
Set up steps
STEP-1: Follow the steps below to connect your router.
STEP-2: Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.
STEP-3: Launch the Tether App on your phone.
STEP-4: Select your TOTOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.
STEP-5: Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)
STEP-6: Quick Setup.
STEP-7: More features: Click Application or Tools.
STEP-8: Binding router, remote management.
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A702R, A3002RU |
Application introduction: This tutorial will show you how to configure TR069 feature on TOTOLINK Router devices.
Setup steps
STEP-1: Install router as the following diagram
The router WAN IP and TR069 server IP must be on the same network segment or can access each other; TR069 server needs to turn off the firewall and other functions.
STEP-2: Login router
Access Login page (Default IP: 192.168.0.1) and then you need enter the Administrator information (Default ID and Password is admin).
STEP-3: WAN settings
Go to the Advanced Setting page, setup the WAN information.
STEP-4: TR069 settings
Next, setup the TR069 information.
R069 – Connection Information
It is suitable for: N150RH, N150RT, N151RT, N200RE, N210RE, N300RT, N301RT , N300RH, N302R Plus, A702R, A850R, A3002RU |
Set up steps
STEP-1: Connect your computer
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3:
Enter advanced settings to select the LAN settings in Network,click the Set Static DHCP.
STEP-4:
Checklist the Enable Static DHCP to open the setting,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU |
Set up steps
STEP-1: Connect your computer
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3:
Enter advanced settings to select the LAN settings in Network,click the Set Static DHCP.
STEP-4:
Checklist the Enable Static DHCP to open the setting,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.
It is suitable for: All TOTOLINK routers |
Application introduction
This article describes how to quickly make a wireless connection through the router's WPS button.
Diagram
Set up steps
STEP-1:
l Please make sure your router has WPS button before setting.
l Please make sure your wireless client supports WPS functionality before setting.
STEP-2:
Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.
2-1. RST/WPS button:
2-2. WPS button:
Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.
STEP-3:
After pressing the WPS button, use wireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example. As shown below.
3-1. Computer wireless connection:
3-2. Mobile phone wireless connection:
It is suitable for: All TOTOLINK routers |
Set up steps
STEP-1: Connect your computer
Connect to the router's LAN port with a network cable from a computer network port (or to search for and connect the router's wireless signal).
STEP-2: Assigned manually IP Address
2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.
2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.
STEP-3: Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example.
STEP-4: After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.
Note: Your terminal device must choose to obtain an IP address automatically to access the network.
It is suitable for: All TOTOLINK routers |
Application introduction
This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.
Set up steps
STEP-1: Router Mode(Gateway mode)
Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.
STEP-2: Repeater mode
Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.
STEP-3: AP mode(Bridge mode)
AP mode, the router acts as a wireless switch, you can transfer the superior's AP/Router wired signal into wireless signal.
STEP-4: WISP Mode
WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.
FAQ Common problem
Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?
A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.
Q2: How to enter the router management interface in AP mode/Repeater mode?
A: Refer to FAQ#How to login to router by manually configuring IP
It is suitable for: All TOTOLINK Router |
Application introduction
After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.
Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password.
Method One: login via PC
STEP-1: Change browser and clear browser cache
Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache.
Delete cookies on the web browser. Here we take Firefox for example.
Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.
STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
Method Two: login via tablet/Cellphone
STEP-1: Change browser and clear browser cache
Try other browser, such as Firefox, Opera, etc., and clear your browser cache.
STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU |
Application introduction
You can maintain the system time by synchronizing with a public time server over the Internet.
Set up steps
STEP-1:Login to the TOTOLINK router in your browser.
STEP-2: In the left menu, click System->Time Zone Setting, follow the steps below.
❶Time Set Type select
❷Time Zone select
❸Enter NTP Server
❹click Apply
❺click Update now
[Note]:
Before time Zone Setting, you need to confirm that the router is connected to the internet.