/themes/my_demo/public/assets/images/s24w1.png

A800R


- Complies with the next generation IEEE 802.11ac Wi-Fi standard.

- 867Mbps on 5GHz and 300Mbps on 2.4GHz band for total 1167Mbps simultaneously.

- Middle power design on 5G bands is perfect for long distance wireless transmission.

- MU-MIMO technology allows data transfer to multiple devices at the same time.

- 1GHz CPU improves Wi-Fi transfer efficiency.

- Supports DHCP, Static IP, PPPoE, PPTP and L2TP broadband functions.

- Provides 64/128-bit WEP, WPA, WPA2 and WPA/WPA2 (TKIP+AES) security.

- Connects to secure network easily and fast using WPS.

- QoS: Bandwidth Control based on IP.

- Supports IP, MAC, URL filtering and Port Forwarding. 

- Universal Repeater and WDS function for easy Wi-Fi extension.

- Multi-SSID function enables users to create multiple Wi-Fi networks.

- Supports IPTV and other internet services.

- Easy setup with smartphone UI simplifies the basic settings.

Hardware

Interface

- 4 * 100Mbps LAN Ports

- 1 * 100Mbps WAN Port

Power Supply - 9VDC / 0.8A
Button

- 1 * RST/WPS Button

LED Indicators

- 1 * Status

- 4 * LAN 

- 1 * WAN

Antenna

- 4 * 5dBi fixed antennas

Dimensions (L x W x H)

- 170.2 x 138.0 x 40.6 mm (not including antennas)

Wireless

Standards

- IEEE 802.11ac

- IEEE 802.11a 

- IEEE 802.11b

- IEEE 802.11g

- IEEE 802.11n

RF Frequency

- 2.4GHz/5GHz
Data Rate

- 2.4GHz: Up to 300Mbps

- 5GHz: Up to 867Mbps

EIRP

- 2.4GHz < 22dBm

- 5GHz < 20dBm 

Wireless Security - 64/128-bit WEP, WPA,WPA2 and WPA-Mixed 
Reception Sensitivity

- 2.4G: 11b: <-81dbm;

            11g: <-68dbm;

            11n: HT20<-65dbm  HT40: <-62dbm

- 5G: 11a:<-68dbm;

         11n: HT20<-65dbm  HT40: <-62dbm 

         11ac: <-51dbm

Software

Operation Mode

- Gateway Mode

- Bridge Mode

- Repeater Mode

- WISP Mode

Network

- Static DHCP Setting, IPTV, IPV6

WAN Type

- Static IP,

- DHCP, 

- PPPoE/Russia PPPoE, 

- PPTP/Russia PPTP, 

- L2TP/Russia L2TP

Wireless Functions

- Multiple SSID, 

- MAC Authentication, 

- WDS, 

- WPS, 

- WMM

Schedule

- Reboot Schedule

- Wireless Schedule

QoS

- QoS Setup, 

- Connect Limit Control

Firewall

- MAC Filtering

- IP Filtering 

- Port Filtering 

- URL Filtering Port Forwarding

- DMZ

Management

- Administrator Setting, 

- Time Setting, 

- DDNS, 

- Remote Management, 

- UPnP, 

- Upgrade Firmware, 

- System Configuration, 

- System Log, and more

Others
Package Contents

- A800R Wireless Router *1

- Power Adapter *1

- Ethernet Cable *1

- Quick Installation Guide *1

Environment

- Operating Temperature: 0℃~50℃ (32 ℉~122℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing

  • 1

No

Title

Views
1

How to setup TOTOLINK Router on App

4054


     It is suitable for: TOTOLINK router

Application introduction:

This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.

 

 Set up steps 

STEP-1: Follow the steps below to connect your router.

图片55.png 

STEP-2: Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.

图片56.png 

STEP-3: Launch the Tether App on your phone.

 图片57.png

STEP-4: Select your TOTOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.

 图片59.png

STEP-5: Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)

 图片60.png

STEP-6: Quick Setup.

 图片62.png图片64.png


STEP-7: More features: Click Application or Tools.

 图片68.pngSTEP-8: Binding router, remote management. 

图片70.png

2

How to set up static DHCP

745

     It is suitable for: N300RH_V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU, A7000R

Set up steps 

STEP-1: Connect your computer

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

图片1.jpg

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

图片2.png 

STEP-3:

Select advanced settings to enter the settings page

图片3.png 

STEP-4:

Enter the  Static DHCP Setting to open the setting and checklist the Enable,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.

图片4.png

3

How to use the router's WPS button?

1741

     It is suitable for: All TOTOLINK routers

Application introduction 

This article describes how to quickly make a wireless connection through the router's WPS button.

Diagram

1.png 

Set up steps 

STEP-1:

Please make sure your router has WPS button before setting.

Please make sure your wireless client supports WPS functionality before setting.

 

STEP-2:

Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.

2-1. RST/WPS button

2.png 

2-2. WPS button:

QQ截图20200821135919.png 

Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.

 

STEP-3:

After pressing the WPS button, use wireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example. As shown below.

3-1. Computer wireless connection:

3.png 

3-2. Mobile phone  wireless connection:

4.png

4

How to login to router by manually configuring IP?

1444

     It is suitable for: All TOTOLINK routers

Set up steps 

STEP-1: Connect your computer

Connect to the router's LAN port with a network cable from a computer network port (or to search for and connect the  router's wireless signal).

 

STEP-2: Assigned manually IP Address

2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.

1.png 

 

2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.

2.png 

STEP-3: Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example.

3.png 

STEP-4: After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.

4.png 

Note: Your terminal device must choose to obtain an IP address automatically to access the network.

5

Introduction to the four Operation Mode of the router

8814

     It is suitable for: All TOTOLINK routers

Application introduction 

This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.

 

 Set up steps 

STEP-1: Router Mode(Gateway mode)

Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.

1.png 

STEP-2: Repeater mode

Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.

2.png 

STEP-3: AP mode(Bridge mode)

AP mode, the router acts as a wireless switch, you can transfer the superior's AP/Router wired signal into wireless signal.

3.png 

STEP-4: WISP Mode

WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.

4.png

 

 FAQ Common problem 

Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?

A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.

 

Q2: How to enter the router management interface in AP mode/Repeater mode?

A: Refer to FAQ#How to login to router by manually configuring IP

6

What if the Router can't log in to the new Chrome?

1536

     It is suitable for: All TOTOLINK Router

Application introduction 

After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.

Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password. 

1.png


Method One: login via PC 

STEP-1: Change browser and clear browser cache

Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache. 2.png

Delete cookies on the web browser. Here we take Firefox for example.

Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.

3.png 

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

4.png 

 

 Method Two: login via tablet/Cellphone 

STEP-1: Change browser and clear browser cache

Try other browser, such as Firefox, Opera, etc., and clear your browser cache.

5.png

STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

6.png

7

How to synchronize the router's system time with internet time?

487

     It is suitable for: N300RH_V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU

Application introduction 

You can maintain the system time by synchronizing with a public time server over the Internet.

 

Set up steps 

STEP-1:Login to the TOTOLINK router in your browser.

1.png 

STEP-2: In the left menu, click Management->Time Setting, follow the steps below.

Time Zone select

click NTP Client Update

Enter NTP Server

click Apply

click Copy PC's  Time


2.png 

[Note]:

Before time Setting, you need to confirm that the router is connected to the internet.

8

How to properly download upgrade firmware of router?

1139

     It is suitable for: All TOTOLINK routers

 Preparation 

Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade. 

Wrong firrmware version may damage your device and no warrante.


 Set up steps 

STEP-1: Guide for Hardware Version

For most TOTOLINK routers, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example N300RT) and ended with Hardware Version (for example V2.0) is the serial number of your device. See below:

1.png 

STEP-2:

Open browser, enter www.totolink.net. Download the required files.

For example, if your hardware version is V2.0 , please download V2 version.

Note: If the hardware version is V1, V1 will be hidden.

2.png 

 

STEP-3:

Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)

3.png

9

How to view System Log of TOTOLINK Router?

550
It is suitable for: N300RH_V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU

Application introduction:

The system log of the router can be used to find out why the network connection fails.


Set up steps 

STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

2.png 

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

 

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

3.png

STEP-3: 

Enter the Advanced Setup page of the router, Click Management->System Log on the navigation bar on the left.

3.png

 

STEP-4:

Before view System Log of Router, you confirm that the system log is turned on. Click Refresh button to view system log.

4.png 

STEP-5:

If you have not turned on System Log. Select Enable On/Off bar, then click Apply button. Finally Click Refresh  button to view system log.

Note: Please click Refresh button to view the current log information.

5.png

10

How to set up DMZ on TOTOLINK Router?

421
It is suitable for: N300RH_V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU

Application introduction:

DMZ (Demilitarized Zone) is a network which has fewer default firewall restriction than the LAN does. It allow all the devices connected to the port to be exposed to the Internet for some special-purpose services.


Set up steps 

STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

2.png 

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

 

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

3.png

STEP-3: 

Enter the Advanced Setup page of the router, Click Firewall->DMZ on the navigation bar on the left.


3.png 

 

STEP-4:

Select Enable On/Off bar,You can setup the Host IP address in the box,And then click Apply button.


4.png

Note:

When DMZ is enabled, the DMZ host is totally exposed to the internet, which may bring some potential safety hazards. If DMZ is not in use, please disable it in time.