- Supports SD-WAN function to realize remote data transmission and telecommuting.
- Complies with the IEEE 802.11ac Wave2 Wi-Fi standard.
- Simultaneous 1733Mbps on 5GHz and 800Mbps on 2.4GHz for a total of 2533Mbps.
- Middle power design on both bands is perfect for long-distance wireless transmission.
- MU-MIMO technology allows to transfer data to multiple devices at the same time.
- Beamforming technology improves directional signal transmission or reception, and reduces interferences.
- Five Gigabit ports ensure high-speed Internet access and wired speed.
- Supports DHCP, Static IP, PPPoE, PPTP and L2TP broadband functions.
- Provides 64/128-bit WEP, WPA, and WPA2.
- Connects to a secure network easily and fast using WPS.
- QoS: Bandwidth Control based on IP address.
- Supports IP/Port filtering, MAC filtering, URL filtering and Port Forwarding.
- Universal Repeater and WDS function for easy Wi-Fi extension.
- Multi-SSID function enables users to create multiple Wi-Fi networks.
- Supports IPTV and other internet services.
- Easy setup with APP and quick installation PC UI.
Hardware | |
---|---|
Interface |
- 4 * 1000Mbps LAN Ports - 1 * 1000Mbps WAN Port |
Power Supply | - 12 VDC / 1.5A |
Button | - 1 * RST/WPS Button |
LED | - 1 * SYSTEM LED |
Antenna |
- 4 * 5dBi fixed antennas (2.4G) - 4 * 5dBi fixed antennas (5G) |
Dimensions (L x W x H) | - 273.5 x 182 x 60.5mm (not including antennas) |
Wireless | |
Standards | - IEEE 802.11ac, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g,IEEE 802.11n |
RF Frequency |
- 2.4GHz/5GHz |
Data Rate |
- 2.4GHz: Up to 800Mbps - 5GHz: Up to 1732Mbps |
EIRP |
- 2.4GHz < 22dBm - 5GHz < 20dBm |
Wireless Security | - WPA/WPA2 Mixed |
Reception Sensitivity |
- 2.4G: 11b 11M:-81dBm@8% PER 11g 54M:-68dBm@10% PER 11n HT20 MCS7:-65dBm@10% PER HT40 MCS7:-62dBm@10% PER - 5G: 11a 54M:-68dBm@10% PER 11n HT20 MCS7:-65dBm@10% PER HT40 MCS7:-62dBm@10% PER 11ac VHT80 MCS9:-51dBm@10% PER |
Software | |
Operation Mode |
- Gateway Mode - Repeater Mode - AP Mode - WISP Mode |
Home |
- Quick Setup - Basic setup - Advanced setup - QR Code - LED - Logout - Reboot |
Network |
- WAN Setting - LAN Setting - DDNS Setting - IPTV Setting - IPv6 Setting |
WAN Type |
- Static IP, - DHCP, - PPPoE/Russia PPPoE, - PPTP/Russia PPTP, - L2TP/Russia L2TP |
Wireless |
- Basic setup - Guest Network(Multiple SSID) - Wireless Schedule - Access Control - Advanced setup |
Parental Control | - Internet time control based on MAC |
QoS |
- Up/Down speed control on WAN, - Bandwidth control based on IP address |
Device management |
- Static Route - Routing Table - IP/MAC Binding |
Security |
- MAC Filtering - IP/Port Filtering - URL Filtering |
NAT |
- Virtual Server(Port Forwarding) - DMZ - VPN passthrough |
Remote Networking |
- SD-WAN - VPN Server |
Tools |
- Upgrade Firmware - Time Setup - Remote management - Password Settings - Reboot Schedule - System Log and so on |
Others | |
Package Contents |
- A7000R Wireless Router *1 - Power Adapter *1 - Ethernet Cable *1 - Quick Installation Guide *1 |
Environment |
- Operating Temperature: 0℃~50℃ (32 ℉~122℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 10%~90% non-condensing - Storage Humidity: 5%~90% non-condensing |
It is suitable for: TOTOLINK router |
Application introduction:
This articles Applies to wireless router that’s compatible with TOTOLINK App. This article will take A720R as an example.
Set up steps
STEP-1: Follow the steps below to connect your router.
STEP-2: Connect your smart phone to TOTOLINK Wi-Fi. The default wireless network name of TOTOLINK wireless router are printed on the bottom label.
STEP-3: Launch the Tether App on your phone.
STEP-4: Select your TOTOLINK wireless router from device list.Then Enter admin for the password and then click LOGIN.
STEP-5: Log in to Quick Setup.(Auto jump Quick Setup is only Applicable for the first connection setup)
STEP-6: Quick Setup.
STEP-7: More features: Click Application or Tools.
STEP-8: Binding router, remote management.
It is suitable for: N300RH_V4, N600R, A800R, A810R, A3100R, T10, A950RG, A3000RU, A7000R |
Set up steps
STEP-1: Connect your computer
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3:
Select advanced settings to enter the settings page
STEP-4:
Enter the Static DHCP Setting to open the setting and checklist the Enable,input IP Address ,MAC Address and Comment.After click Apply ,we can see the information in the static DHCP List.
It is suitable for: All TOTOLINK routers |
Application introduction
This article describes how to quickly make a wireless connection through the router's WPS button.
Diagram
Set up steps
STEP-1:
l Please make sure your router has WPS button before setting.
l Please make sure your wireless client supports WPS functionality before setting.
STEP-2:
Press WPS button on the router for 1s, WPS enabled. There are two types of wireless router WPS buttons: RST/WPS button and WPS button. As shown below.
2-1. RST/WPS button:
2-2. WPS button:
Note: If router is a RST/WPS button, no more than 5s, router will be reset to factory defaults if you press it for more than 5s.
STEP-3:
After pressing the WPS button, use wireless client to connect to the router WIFI signal. Using Computer and Mobile phone wireless connection as an example. As shown below.
3-1. Computer wireless connection:
3-2. Mobile phone wireless connection:
It is suitable for: All TOTOLINK routers |
Set up steps
STEP-1: Connect your computer
Connect to the router's LAN port with a network cable from a computer network port (or to search for and connect the router's wireless signal).
STEP-2: Assigned manually IP Address
2-1. If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.
2-2. If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.
STEP-3: Login to the TOTOLINK router in your browser. Take 192.168.0.1 as an example.
STEP-4: After setting up the router successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.
Note: Your terminal device must choose to obtain an IP address automatically to access the network.
It is suitable for: All TOTOLINK routers |
Application introduction
This article will introduce the difference between Router Mode, Repeater mode, AP mode, and WISP Mode.
Set up steps
STEP-1: Router Mode(Gateway mode)
Router Mode, the device is supposed to connect to the internet via ADSL/Cable modem. The WAN type can be setup on WAN page, including PPPOE, DHCP client, Static IP.
STEP-2: Repeater mode
Repeater Mode, you can extend the superior Wi-Fi signal by Repeater setting function under the Wireless column to increase the coverage of the wireless signal.
STEP-3: AP mode(Bridge mode)
AP mode, the router acts as a wireless switch, you can transfer the superior's AP/Router wired signal into wireless signal.
STEP-4: WISP Mode
WISP Mode, all ethernet ports are bridged together and the wireless client will connect to ISP access point. The NAT is enabled and PCs in ethernet ports share the same IP to ISP through wireless LAN.
FAQ Common problem
Q1: Can I log in to the TOTOLINK ID after setting the AP mode/Repeater mode?
A: TOTOLINK ID cannot be logged in after setting AP mode/Repeater mode.
Q2: How to enter the router management interface in AP mode/Repeater mode?
A: Refer to FAQ#How to login to router by manually configuring IP
It is suitable for: All TOTOLINK Router |
Application introduction
After entering the management address of the router in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.
Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password.
Method One: login via PC
STEP-1: Change browser and clear browser cache
Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache.
Delete cookies on the web browser. Here we take Firefox for example.
Note: In general, the browser enters the management address of the router and error pops up. Please use this method first.
STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
Method Two: login via tablet/Cellphone
STEP-1: Change browser and clear browser cache
Try other browser, such as Firefox, Opera, etc., and clear your browser cache.
STEP-2: Enter 192.168.0.1 into the address bar of your browser. Log in the settings interface.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
It is suitable for: All TOTOLINK routers |
Preparation
l Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade.
l Wrong firrmware version may damage your device and no warrante.
Set up steps
STEP-1: Guide for Hardware Version
For most TOTOLINK routers, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example N300RT) and ended with Hardware Version (for example V2.0) is the serial number of your device. See below:
STEP-2:
Open browser, enter www.totolink.net. Download the required files.
For example, if your hardware version is V2.0 , please download V2 version.
Note: If the hardware version is V1, V1 will be hidden.
STEP-3:
Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)
It is suitable for: All TOTOLINK Router
Method One:
Check the label on the bottom of the router to get the login address of the router, as shown below.
Method Two:
Obtain the login address of the router through the computer (take win10 system as an example).
STEP-1:
The computer connects to the wireless signal of the router. (The back sticker has the factory default wireless signal name)
STEP-2:
2-1. Click on wireless icon at the bottom right corner on the screen, Select Network & Internet settings.
2-2. Select the connected wireless network.
2-3. Select Details to check whether an IP address is obtained.
If the IPV4 address is 192.168.0.*, the default gateway of IPV4 is 192.168.0.1, indicating that the login address of the router is 192.168.0.1.
If the IPV4 address is 192.168.1.*, the default gateway of IPV4 is 192.168.1.1, indicating that the login address of the router is 192.168.1.1.
If the IP is not available, you can disconnect the signal and reconnect it. If it is still invalid, you can restore the router to the factory and check the IP address obtained after the connection signal.
Note: Before this, please confirm that your computer is selected to "acquire IP address automatically".
For the setting method of the computer automatically obtaining the IP address, refer to the following figure (take win10 system as an example).
Obtain the login address of the router through your mobile phone.
STEP-1: The wireless signal that the phone connects to the router. (The back sticker has the factory default wireless signal name)
STEP-2: Select your phone's wireless network settings to check if you have an IP address.
At this point, the IPV4 address is 192.168.0.*, and the IPV4 default gateway is 192.168.0.1, indicating that the router's login address is 192.168.0.1.
STEP-3: Enter 192.168.0.1 in the address bar of the mobile browser.
STEP-4: If you still can't enter, you can change the browser or a mobile phone or computer through the 192.168.0.1 login interface.
STEP-5: If the fourth step is invalid, the router can be reset.
Reset method:
1. Please make sure your router’s power is on regularly, then press the
RST button for about 10s.(The RESET pin should be held with a pointed object such as a paper clip or a pen tip)
2. Loosen the button until your router’s LED lights all flashing, then you
have reset your router to default settings.
Application introduction
After entering the management address of the router in the address bar of the browser, the management page cannot be displayed, or the page cannot be displayed after entering the management password, as shown below.
Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password.
It is suitable for: All TOTOLINK Router
If you can’t login the web interface of TOTOLINK, it may be related to factors such as router, line, browser or computer. Please follow the steps below for detailed troubleshooting.
Set up steps
STEP-1: Check line connection
The operating computer should be connected to the router and can be connected via a network cable or wirelessly.
Connect through the network cable: Operate the computer and connect to the LAN port of the router, and ensure that the indicator of the computer network cable interface and the corresponding interface of the router is on.
Wireless connection: The wireless terminal needs to connect to the router signal. When the factory setting is set, the router default Wi-Fi name and password are printed on the bottom label of the router.
Note: If the signal of the wireless router is not found, it is recommended to reset the router.
STEP-2: Check computer IP address
If the computer does not specify or obtain the correct IP address, it will be unable to log in to the management interface.
Be sure to set the IP address of the operating computer to be automatically obtained. Take the Windows 10 system wired network card as an example. For the setting method of the computer automatically obtaining the IP address, refer to the following figure.
STEP-3: Check login address
TOTOLINK router currently has three types of login addresses, and different router addresses may be different:
Management page address: itotolink.net or 192.168.0.1 or 192.168.1.1.
For the specific login address, please check the sticker at the bottom of the router, as shown below (take itotolink.net as an example).
After confirming the login address, open the browser, clear the address bar and enter the management address, press Enter, as shown below.
STEP-4: Check login password
If the password input box of the login management interface can be displayed, but the wrong password is entered, the management interface cannot be logged.
Our common default login password prompt box, as shown below.
Login prompt box |
Default username |
Default password |
|
admin (Lower case letters) |
admin (Lower case letters) |
Note: If you forget the set or modified management password, you can only restore the factory settings.
STEP-5: Change your browser or computer
A. Change browser and clear browser cache
Try changing your browsers like Google Chrome, Firefox, Internet Explorer, etc., and clear your browser cache.
Delete cookies on the web browser. Here we take Google Chrome for example.
Note: In general, the browser enters the management address of the router and a 404 error pops up. Please use this method first.
B. Try to log in with your phone
If you are unable to log in using your computer, you can try to change another computer or use your mobile phone to log in to the management interface (using the mobile browser), as shown below, enter itotolink.net as an example.
STEP-6: Reset router
If you still cannot log into the router's setup page after troubleshooting according to the above methods, it is recommended to restore the factory settings. There are two types of wireless router reset buttons: RESET pin and RESET button. As shown below.
Reset method:
1. Please make sure your router’s power is on regularly, then press the
RST button for about 10s.(The RESET pin should be held with a pointed object such as a paper clip or a pen tip)
2. Loosen the button until your router’s LED lights all flashing, then you
have reset your router to default settings.
Note: Some wireless routers share a button with RESET.
It is suitable for: All TOTOLINK routers |
Application:This article will illustrate way to manually set an IP address on Windows 10/Mobile phone..
Manually set IP address on Windows 10
Set up steps
1-1. Find the small computer icon in the lower right corner of your computer desktop,click on “Network & Internet settings”.
1-2. Pop up the Network & Internet Center interface, click on “Change adapter options” under Related settings.
1-3. After open changing adapter options,find Ethernet,click and select Properties.(If you want to check the wireless IP address, find WLAN)
1-4. Select “Internet Protocol Version 4 (TCP/IPv4)”,click on “Properties”.
1-5. To manually set IP address, select “Use the following IP address”, set the IP address and subnet mask; Finally click on “ok”.Take the IP address 192.168.0.10 as an example.
1-6. When you don't need to set the IP address manually, Please select Obtain an IP address automatically and Obtain DNS Server address automatically.
Manually set IP address on Mobile phone
Set up steps
1-1. Click Settings on the screen-> Wireless Network (or Wi-Fi), click on the exclamation mark behind the wireless signal.
Note: Before manually set IP address , make sure the wireless terminal is currently connected or is connecting to the wireless signal.
1-2. Click Static, enter the corresponding parameters in the IP address, gateway, and network mask positions, and click Save. Take the IP address 192.168.0.10 as an example.
1-3. When you don't need to set the IP address manually, Please turn off static IP.