N300UM is a Wireless USB Adapter with two internal antennas and one USB2.0 interface. It complies with the most advanced IEEE 802.11n standard and can deliver up to 300Mbps wireless data rate. N300UM also supports WPS (Wi-Fi Protected Setup) with fast-click button for high security connection. So it is the perfect solution to access WLAN network.
High Speed Performance
Complying with 802.11n standard, N300USM provides up to 300Mbps wireless transfer rate for users to enjoy the best WiFi connection with stable throughput.
One Click WiFi Protected Setup
To secure the wireless connection, the adapter provides a WPS button so that users can easily setup a wireless connection with protection just by one click.
- Complies with IEEE 802.11n /g/b standards for 2.4GHz Wireless LAN.
- Up to 300Mbps data rate for Wi-Fi network.
- USB2.0 port is available for all PCs.
- Supports 64/128-Bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK (TKIP/AES) encryption.
- WPS button allows to setup a security connection by one click.
- Supports infrastructure and Ad-Hoc network modes.
- Supports Windows 10/8/7/XP/Vista (32/64-bit) and Linux.
- Easy to install and configure.
- USB 2.0
|- 1 *Status|
|Antenna||- 2 *internal antennas|
-1 *WPS Button
|Dimensions(L x W x H)||
- 55.9 x 20 x 7mm
- Up to 300Mbps(auto-sense with auto fallback)
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n
- 802. 11n: Up to 300Mbps
- 802.11g: Up to 54Mbps (dynamic)
- 802.11b: Up to11Mbps (dynamic)
- < 20dBm
Media Access Protocol
- CSMA/CA with ACK
|Wireless Security||- 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)|
- 2.4G:11b 11M：-81dBm@8% PER
11g 54M：-68dBm@10% PER
11n HT20 MCS7：-65dBm@10% PER
HT40 MCS7：-62dBm@10% PER
- N300UM Wireless Adapter *1
- Resource CD *1
- Quick Installation Guide *1
- Windows 10 (32/64bits), Windows 8 (32/64bits), Windows 7 (32/64bits), Windows XP (32/64bits)
- Operating Temperature: 0℃~40℃ (32 ℉~104℉)
- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~90% non-condensing
It is suitable for: All TOTOLINK adapters
l Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding driver version
Set up steps
STEP-1: Guide for Hardware Version
For most TOTOLINK adapter, you can see a bar coded stickers at the front of the device, the character string started with Model No.(for example N150UA) and ended with Hardware Version (for example V5.0) is the serial number of your device. See below:
Open browser, enter www.totolink.net Download the required files.
For example, if your hardware version is V5.0 , please download V5 version.
Note: If the hardware version is V1, V1 will be hidden.
STEP-3: Unzip the file, click to install the driver.
STEP-4: Please waiting for a few seconds.
STEP-5: Click"Finish", the driver program is installed successfully.
This FAQ is suitable for: N150UA, N150UH, N150UM, N150USM, N300UM, N500UD
Application: TOTOLINK WiFi adapter can realize the wireless signal’s receiving and enlarging and also work as an AP. It can be a WiFi hot spot by using wired network or existing WiFi signal to realize Internet sharing for multiple devices.
To realize the Soft AP function, you just need to follow the steps below.
STEP-1: Install the driver
Double click on the install application, just select “Next” step by step according to the tips. As there is the applying icon on your desktop, it means you have installed the application successfully.
Right click on the TOTOLINK Ultility icon, and select “Switch to AP Mode”.
The icon will change after changing to the AP mode.
Make sure that your wired network is shared
3-1. Right click on “Online neighbors”, select “Property”, then double click on “Local connection Status”. Click “Properties” afterwards.
3-2. In the Local Area Connection Properties interface, click “Sharing”, tick the option, and click “OK”.
Click the setup icon, and enter the SSID (Ex. SoftAP), click the arrow icon afterwards.
Select the correct Channel according to you situation.
Choose the encryption mode and type for security. WPA-PSK and WPA2-PSK is recommended.
Enter the password and click the arrow icon to finish AP setup.
Soft AP setup successfully and you can see the detailed information in the interface.
This FAQ is suitable for: All TOTOLINK adapters.
Application: The procedures in different systems are quite similar, therefore, here takes the procedures in Windows XP for example.
Insert the Resource CD into your CD-ROM drive, the window (Figure 1) will appear. Please choose the model No. (Ex. A1000UA) from the drop-down list and click Install.
Follow the instructions step-by-step to complete Installation.