- Complies with IEEE 802.11a/b/g/n/ac standards.
- Up to total 1267Mbps wireless speed on simultaneous 2.4GHz and 5GHz.
- Supports 64/128-bit WEP, WPA,WPA2,WPA-PSK, WPA2-PSK encryption.
- USB3.0 enables super-fast data transmission, even 2x faster than the universal USB2.0.
- Built-in FEM (PA + LNA) module, creates stronger signal and wider signal receiving range
- Smoothly running on Windows 10/8.1/8/7/ XP(32/64-bit).
- External omni-directional antenna improves the wireless reception sensitivity.
- Secured wireless connection can be established with only one push on the WPS button.
| Hardware | |
|---|---|
Interface |
- 1* USB 3.0 |
LED Indicator |
- 1 *Wireless(blue color) |
|
Dimensions (L*W *H) |
- 10cm*3cm*1.8cm(USB case)+13cm*1.5cm*1.6cm(antenna) |
| Antenna |
- External dual-band antennas*1 - Internal dual-band antennas*1 |
| Wireless | |
|---|---|
| Standards |
- IEEE 802.11ac, - IEEE 802.11a, - IEEE 802.11b, - IEEE 802.11g, - IEEE 802.11n, - IEEE 802.11s |
| RF Frequency |
- 2.4~2.4835GHz - 5.18~5.825GHz |
| Data Rate |
- 2.4GHz: 400Mbps - 5GHz: 867Mbps |
|
EVM (Error Vector Magnitude) |
- 11g/a: <-25dB; - 11n:<-28dB; - 11ac<-32dB |
Wireless Security |
- 64/128-bit WEP, WPA, WPA2, WPA-PSK, WPA2-PSK (TKIP/AES) |
Reception Sensitivity |
- 2.4G: 11b: 11M 20±1.5dBm； 11g: 54M 17±1.5dBm； 11n: MCS7 HT20 16±1.5dBm； MCS7 HT40 16±1.5dBm； - 5G: 11ac: MCS9 VHT80 15±2dBm； 11a: 54M 17±2dBm； 11n: MCS7 HT20 17±2dBm； MCS7 HT40 17±2dBm； |
| Others | |
|---|---|
|
Package Contents |
- A2100UA Wireless Adapter *1 - Installation Guide*1 |
|
System Requirement |
- Windows 10 (32/64bits), - Windows 8/8.1 (32/64bits), - Windows 7 (32/64bits), - Windows XP(32/64bits) |
Environment |
- Operating Temperature: 0℃~50℃ (32 ℉~122℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 10%~90% non-condensing - Storage Humidity: 5%~90% non-condensing |
It is suitable for: All TOTOLINK adapters |
Diagram
Preparation
l Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding driver version
Set up steps
STEP-1: Guide for Hardware Version
For most TOTOLINK adapter, you can see a bar coded stickers at the front of the device, the character string started with Model No.(for example N150UA) and ended with Hardware Version (for example V5.0) is the serial number of your device. See below:
STEP-2:
Open browser, enter www.totolink.net Download the required files.
For example, if your hardware version is V5.0 , please download V5 version.
Note: If the hardware version is V1, V1 will be hidden.
STEP-3: Unzip the file, click to install the driver.
STEP-4: Please waiting for a few seconds.
STEP-5: Click"Finish", the driver program is installed successfully.
This FAQ is suitable for: All TOTOLINK adapters. |
Application: The procedures in different systems are quite similar, therefore, here takes the procedures in Windows XP for example.
STEP-1:
Insert the Resource CD into your CD-ROM drive, the window (Figure 1) will appear. Please choose the model No. (Ex. A1000UA) from the drop-down list and click Install.
STEP-2:
Follow the instructions step-by-step to complete Installation.
