- Complies with IEEE 802.11ac/a/b/g/n standards.
- Up to 1167Mbps data rate for Wi-Fi network.
- MU-MIMO technology upgrades your PC/Laptop to enjoy faster Wi-Fi.
- Operates on either 2.4GHz or 5GHz band.
- Supports 5G band with less contention interference, more stable and better performance.
- Supports 64/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK encryption.
- Provides Micro USB3.0 interface with USB extension cable.
- Works with all existing network infrastructures.
- Supports Windows 10/8/7/ XP/Vista (32/64-bit).
- Easy to install and configure.
| Hardware | |
|---|---|
| Interface | - Micro 10 Pin USB 3.0 |
LED Indicator |
- 1 *Wireless |
| Antenna | - 2 * 5dBi detachabl antenna |
Button |
-1 *WPS Button |
| Dimensions(L x W x H) | - 90 x 55 x 12mm (not including antennas) |
Wireless | |
| Standards |
- IEEE 802.11ac - IEEE 802.11a - IEEE 802.11b - IEEE 802.11g - IEEE 802.11n |
RF Frequency |
- 2.4GHz/5GHz |
| Data Rate |
- 2.4GHz: Up to 300Mbps - 5GHz: Up to 867Mbps |
EIRP |
- 2.4GHz < 20dBm |
| - 5GHz < 20dBm | |
| Wireless Security | - 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) |
| Reception Sensitivity |
- 2.4G:11b 11M：-81dBm@8% PER 11g 54M：-68dBm@10% PER 11n HT20 MCS7：-65dBm@10% PER HT40 MCS7：-62dBm@10% PER - 5G: 11a 54M：-68dBm@10% PER 11n HT20 MCS7：-65dBm@10% PER HT40 MCS7：-62dBm@10% PER 11ac VHT80 MCS9：-51dBm@10% PER |
| Others | |
| Package Contents |
- A2000UA Wireless Adapter *1 - 5dBi antenna *2 - Resource CD *1 - USB Cable *1 - Quick Installation Guide *1 |
| System Requirement | - Windows 10 (32/64bits), Windows 8 (32/64bits), Windows 7 (32/64bits), Windows XP (32/64bits) |
| Environment |
- Operating Temperature: 0℃~40℃ (32 ℉~104℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 10%~90% non-condensing - Storage Humidity: 5%~90% non-condensing |
It is suitable for: All TOTOLINK adapters |
Diagram
Preparation
l Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding driver version
Set up steps
STEP-1: Guide for Hardware Version
For most TOTOLINK adapter, you can see a bar coded stickers at the front of the device, the character string started with Model No.(for example N150UA) and ended with Hardware Version (for example V5.0) is the serial number of your device. See below:
STEP-2:
Open browser, enter www.totolink.net Download the required files.
For example, if your hardware version is V5.0 , please download V5 version.
Note: If the hardware version is V1, V1 will be hidden.
STEP-3: Unzip the file, click to install the driver.
STEP-4: Please waiting for a few seconds.
STEP-5: Click"Finish", the driver program is installed successfully.
It is suitable for: A2000UA, A3004NS, A5004NS, A7000R, A8000RU |
Application: USB3.0 is the upgraded version of USB2.0 to accelerate data transmitting rate with low power consumption. It adds more practical function base on USB2.0 such as better power management and is backwards compatible with USB2.0.
Comparison of USB3.0 and USB2.0:
Parameter |
USB3.0 |
USB2.0 |
Data Transmission Rate |
Super Speed (5Gbps) High Speed (480Mbps) Full Speed (12Mbps) Low Speed (1.5Mbps) |
High Speed (480Mbps) Full Speed (12Mbps) Low Speed (1.5Mbps) |
Duplex |
Full duplex |
Half duplex |
Cable Signal Count |
Six: Four for super-speed data path Two for non-super-speed data path |
Two: Two for low-speed /full-speed /high-speed data path |
Power Management |
Multi-level link power management supporting idle, sleep and suspend states. |
Port-level suspend with two levels of entry/exit latency. |
USB3.0 Connector：
USB 3.0 Standard-A USB 3.0 Standard-B plug
USB 3.0 Micro plug
This FAQ is suitable for: All TOTOLINK adapters. |
Application: The procedures in different systems are quite similar, therefore, here takes the procedures in Windows XP for example.
STEP-1:
Insert the Resource CD into your CD-ROM drive, the window (Figure 1) will appear. Please choose the model No. (Ex. A1000UA) from the drop-down list and click Install.
STEP-2:
Follow the instructions step-by-step to complete Installation.
