- Eliminates dead zones with strong Wi-Fi expansion at combined speed of up to 1.2Gbps.
- Delivers over both the 2.4GHz band(300Mbps) and 5GHz band(867Mbps) for more stable and fast wireless experience.
- Intelligent screen helps to find the best spot to set up by showing the connection status and signal strength.
- Two high-gain external antennas increase the effective Wi-Fi coverage as well as enhance the reception and transmission stability.
- Ethernet port for Reliable Wired Connection.
- Supports WPS (Wi-Fi Protected Setup) Wi-Fi extension.
- Supports quick setup on Phone UI.
- Supports Access Point Mode.
| Hardware | |
|---|---|
Interface |
- 1*10/100BaseTX(Auto MDI/MDIX)LAN Port |
| Power Supply | - AC 100-240V 50/60Hz 0.1A (built-in power module) |
Display |
- 1*OLED (0.96’’ 128*64 Dots) |
Antenna |
- 2*5dBi External Antennas |
Button |
- 1*MENU/RST Button, |
LED Indicators |
- 1 *SYS (Blue) |
Dimensions (W x L x H) |
- CN/US Standard: 121*82*52.7MM - UK Standard: 121*82*59.2MM - EUR Standard: 121*82*74.5MM |
Wireless | |
|---|---|
| Standards |
- IEEE 802.11ac, - IEEE 802.11a, - IEEE 802.11b, - IEEE 802.11g , - IEEE 802.11n |
| RF Frequency | - 2.4GHz/5GHz |
| Data Rate | - 2.4GHz: 300Mbps |
|
EVM (Error Vector Magnitude) |
- 11b:＜-10dB - 11g/a:＜-25dB - 11n:＜-28dB - 11ac:＜-32dB |
Wireless Security |
- 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
Tx power |
- 2.4G: 11b: 11M 20±1.5dBm; 11g: 54M 16±1.5dBm; 11n: MCS7 HT20 17±1.5dBm; MCS7 HT40 17±1.5dBm; - 5G: 11a: 54M 15±2dBm; 11n: MCS7 HT20 14±2dBm; MCS7 HT40 14±2dBm; 11ac: MCS9 VHT80 13.5±2dBm. |
| Rx sensitivity | - 2.4G: 11b : -81dBm， 11g : -68dBm， 11n : HT20 -65dBm， HT40 -62dBm - 5G: 11ac : -51dBm， 11a : -68dBm， 11n : HT20 -65dBm， HT40 -62dBm |
| Others | |
|---|---|
Package Contents |
- EX1200L AC1200 Dual Band Wi-Fi Smart Screen Display Extender *1 - Quick Installation Guide *1 |
Environment |
- Operating Temperature: 0℃~50℃ (32 ℉~122℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 5%~95% non-condensing - Storage Humidity: 5%~95% non-condensing |
It is suitable for: All TOTOLINK Extender |
Set up steps
STEP-1: Connect your computer
Connect to the extender's LAN port with a network cable from a computer network port (or to search for and connect the extender's wireless signal).
STEP-2: Assigned manually IP Address
TOTOLINK extender’s LAN IP address is 192.168.0.254, please type in IP address 192.168.0.x （“x” range from 2 to 250）, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.254.
STEP-3: Enter 192.168.0.254 into the TOTOLINK extension in your browser. Take the EX200 as an example.
STEP-4: After setting up the extender successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.
Note: Your terminal device must choose to obtain an IP address automatically to access the network.
It is suitable for: All TOTOLINK Extender |
Application introduction
After entering the management address of the extender in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.
Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password.
Take EX200 as an example.
Method One: login via PC
STEP-1: Change browser and clear browser cache
Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache.
Delete cookies on the web browser. Here we take Firefox for example.
Note: In general, the browser enters the management address of the extender and error pops up. Please use this method first.
STEP-2:
2-1. Extender default Gateway IP address 192.168.0.254:
Assigned manually IP address 192.168.0.x （“x” range from 2 to 253）, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.254.
2-2. Enter 192.168.0.254 into the address bar of your browser. Log in the settings interface.
2-3. After setting up the extender successfully, please select Obtain an IP address automatically and Obtain DNS Server address automatically.
Metod Two: login via tablet/Cellphone
STEP-1: Change browser and clear browser cache
Try other browser, such as Firefox, Opera, etc., and clear your browser cache.
STEP-2: Enter 192.168.0.254 into the address bar of your browser. Log in the settings interface.
It is suitable for: All TOTOLINK extenders |
Preparation
l Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade.
l Wrong firrmware version may damage your device and no warrante.
Set up steps
STEP-1: Guide for Hardware Version
For most TOTOLINK extender, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example EX200) and ended with Hardware Version (for example V1.0) is the serial number of your device. See below:
STEP-2:
Open browser, enter www.totolink.net Download the required files.
For example, if your hardware version is V2.0 , please download V2 version.
Note: If the hardware version is V1, V1 will be hidden.
STEP-3:
Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)
