| It is suitable for: TOTOLINK All Models |
|
Background Introduction: |
The network bandwidth resources are limited, and some terminal devices such as high-speed downloads and video live streaming will occupy a large amount of bandwidth, leading to other computers experiencing phenomena such as "slow internet access, high network cards, and high game ping values with large fluctuations".
The QoS function can limit the maximum uplink and downlink rates of computers, thereby ensuring the rational utilization of the entire network bandwidth resources.
|
Set up steps |
STEP 1: Log in to the router management page
In the browser address bar, enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".
STEP 2: Enable QoS function
Find the basic settings as shown in the following figure, locate the QoS switch, and enable it
STEP 3：Set total bandwidth
STEP 4：Add restricted devices
1. Select the 'Add' option from the rule list below.
2. Click on "Magnifier icon" to display the list of currently connected devices.
3. Select the device you want to limit bandwidth on. (The illustrated items are only examples)
4. Specify the upload and download bandwidth size you want to limit.
5. Click the "Add" button on the right side of the rule to add it.
]
|
It is suitable for: All TOTOLINK Models |
|
Set up steps |
STEP 1:
Connect the line according to the method shown in the figure below.
If you don’t have a PC, you can also use your mobile phone or tablet to connect to the router’ WiFi. The SSID is generally TOTOLINK_model, and the login address is itotolink.net or 192.168.0.1
STEP 2 :
Log in to itotolink.net or 192.168.0.1 through a browser to enter the routing dashboard interface.
PC:
Mobile devices：
STEP 3 :
Through the PC interface as follows：
Through the phone UI as follows：
If you cannot successfully log in according to the above methods, or your account password cannot be logged in normally,
It is recommended that you restore the router to its original factory defaults and then operate again.
