- Complies with the latest IEEE11ac standards, delivering 5G wireless speed up to 450Mbps.
- Built-in 12dBi high-gain polarized antennas, transmits wireless signal further and stronger.
- professional protection design on shell, suitable for any kinds of severe environment.
- IP65 level dust-proof and water-proof, 4KV lighting-proof and 15KV ESD static electricity-proof.
- Supports automatically pairing after getting power supply. (Double packed version)
- Supports Passive PoE power supply, transmitting distance can be far as 60 meters, more flexible for cabling deployment.
- Supports DC power supply, requiring no additional PoE equipment and reducing the installation cost.
- 4 intelligent LED indicators intuitively show signal strength.
- Provides AP/Client/Repeater/WISP working modes.
| Hardware | |
|---|---|
|
Interface |
- 1 *10/100Mbps Port (WAN/LAN, Passive PoE in) - 1 *10/100Mbps Port (LAN, Passive PoE in) - 1*Power Port |
| Power Supply |
- 24V Passive PoE / 12VDC/2A - Voltage range: 12-24VDC |
| Button | - 1 *RESET Button |
| Antenna | - 1*Built-in 12dBi dual polarized antennas |
LED Indicators |
- 1 *MODE, - 1 *Power, - 1 *WAN/LAN, - 1 *LAN, - 4 *Signal Strength |
Dimensions（L X W X H） |
- 237.5 x 79 x 58.5mm |
Wireless | |
| Wireless standard |
- IEEE 802.11ac - IEEE 802.11n - IEEE 802.11a |
RF Frequency |
- 5.15~5.825GHz |
| Data Rate | - Up to 450Mbps |
EIRP |
- < 23dBm |
Wireless Security |
- 64/128-bit WEP, WPA/WPA2/WPA-PSK/WPA2-PSK |
| Reception Sensitivity |
- 11n(HT20): -68 dBm@10% PER - 11n(HT40): -65 dBm@10% PER - 11a: -72 dBm@10% PER - 11ac(VHT80): -55 dBm@10% PER |
Software | |
Operation Mode |
- AP Mode - Repeater Mode - Client Mode - WISP Mode |
MIMO Type |
- 5G 1Tx-1Rx |
| Management |
- Save/Reset Settings, - Firmware upgrade, - System Log |
Reliability |
- 4KV Lightning Protection - 15KV ESD Protection - IP65 level dustproof and waterproof |
Others | |
Package Contents |
- CP450 Wireless CPE *1 - Power Adapter *1 - User Guide *1 - Ethernet Cable *1 - Strips*2 |
Environment |
- Operating Temperature: -40℃~70℃ (-40 ℉~158℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 5%~95% non-condensing - Storage Humidity: 5%~95% non-condensing |
It is suitable for: All TOTOLINK CPE |
Application introduction
After entering the management address of the CPE in the address bar of Chrome browser, the page cannot be displayed after entering the management password, as shown below.
Note: Ensure that the login IP address you typed in the address bar is correct, as well as the login username and password.
Set up steps
STEP-1: Change browser and clear browser cache
Try changing old version (before 72.0.3626.96) of Chrome browser or try other browser, such as Firefox, Internet Explorer, etc., and clear your browser cache. 
Delete cookies on the web browser. Here we take Firefox for example.
Note: In general, the browser enters the management address of the CPE and error pops up. Please use this method first.
STEP-2: Take CP900 as an example
2-1. CP900 default Gateway IP address 192.168.0.254:
Assigned manually IP address 192.168.0.x （“x” range from 2 to 253）, the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.254.
2-2. Enter 192.168.0.254 into the address bar of your browser. Log in the settings interface.
[Note]:
The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
It is suitable for: All TOTOLINK CPE |
Preparation
l Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade.
l Wrong firrmware version may damage your device and no warrante.
Set up steps
STEP-1: Guide for Hardware Version
For most TOTOLINK CPE, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example CP300) and ended with hardware Version (for example V2.0) is the serial number of your device. See below:
STEP-2:
Open browser, enter www.totolink.net Download the required files.
For example, if your hardware version is V2.0 , please download V2 version.
Note: If the hardware version is V1, V1 will be hidden.
STEP-3:
Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)
