- Complies with IEEE 802.11 n/g/b standards.
- Up to 300Mbps data rate for Wi-Fi network.
- Practical and simple In-Wall design.
- Supports AP central management via WLAN controller.
- Provides 64/128-bit WEP, WPA, WPA2 and WPA/WPA2 (TKIP+AES) security.
- Multiple APs allows user to add other SSIDs for access management.
- Bridge/Repeater/WDS modes selectable for different requirements.
- PoE power supply supported simplify the deployment.
- USB2.0 port can supply power to many Smart Phones and Pads.
Hardware | |
---|---|
Interface |
- 1 *10/100Mbps RJ45 LAN Port - 1 *RJ11 Port - 1 *USB 2.0 Port |
Power Supply |
- 48V DC/0.3A - IEEE 802.3af PoE |
Button |
- 1 *Reset, - 1 *LED ON / OFF |
LED Indicator | - 1 *System |
Antenna | - Internal Antenna |
Dimensions (L x W x H) |
- Outside: - 86mm x 86mm - 3.38’’ x 3.38’’ - Inside: - 68mm x 68mm x 24.4mm – 2.23’’ x 2.23‘’ x 0.96‘’ |
Wireless | |
---|---|
Standards |
- IEEE 802.11n, - IEEE 802.11g, - IEEE 802.11b, |
RF Frequency | - 2.4~2.4835GHz |
Data Rate |
- 11n: up to 300Mbps - 11g: Up to 54Mbps(dynamic) - 11b: Up to 11Mbps(dynamic) |
EIRP | - < 20Bm |
Wireless Security |
- 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES) |
Reception Sensitivity
|
- 270M: -61 dBm@10% PER - 135M: -65 dBm@10% PER - 54M: -68 dBm@10% PER - 11M: -85 dBm@8% PER - 6M: -88 dBm@10% PER - 1M: -90 dBm@8% PER |
Software | |
---|---|
Status |
- System Status |
Operation Mode |
- Bridge Mode - Repeater Mode |
Network |
- LAN Setting |
Wireless |
- Wireless Status - Basic Setting - Repeater Setting - Multiple APs - MAC Authentication - WDS Setting - Advanced Setting |
Management
|
- Administrator Setting - Time Settings - Upgrade Firmware - Save/Reload Setting - System Log - Reboot Schedule |
Others | |
---|---|
Package Contents
|
- WA300 Wireless AP *1 - Quick Installation Guide *1 |
Environment |
- Operating Temperature: 0℃~50℃ (32 ℉~122℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 5%~95% non-condensing - Storage Humidity: 5%~95% non-condensing |