- Complies with IEEE 802.11 n/g/b Wi-Fi standards
- Capable of speeds of up to 300Mbps
- Sleek and discreet with in-wall design
- IEEE 802.3af/at PoE compliant for simple deployment, easy installation, and low cost
- Supports 64/128-bit WEP, WPA, WPA2 encryption
- Local device management and remote AC central control are available
- Multiple SSIDs work together to create separate networks with proper level of access
- Different modes like Bridge, Repeater and WDS are selectable based on your current environment
Hardware | |
|---|---|
Standards |
- IEEE 802.3, - IEEE 802.3u, - IEEE 802.3af/at |
Interface |
- 1 *10/100Mbps RJ45 LAN port (Auto MDI/MDIX) - 1 *10/100Mbps RJ45 Uplink/LAN port (PoE + Auto MDI/MDIX) |
Button |
- 1 *Reset button |
Power Supply |
- IEEE 802.3af/at PoE compliant |
Antenna |
- 2 * Internal antennas |
LED |
- 1 *SYSTEM LED (two colors) |
Dimensions (L x W x H) |
- Outside: - 86mm x 86mm - 3.38’’ x 3.38’’ - Inside: -77mm x 62.5mm x 24.4mm – 3.03’’ x 2.46‘’ x 0.96‘’ |
Wireless | |
|---|---|
| Standards |
- IEEE 802.11n, - IEEE 802.11g, - IEEE 802.11b, |
| RF Frequency | - 2.4~2.4835GHz |
| Data Rate |
- 11n: up to 300Mbps - 11g: Up to 54Mbps(dynamic) - 11b: Up to 11Mbps(dynamic) |
| EIRP | - < 20Bm |
Wireless Security |
- 64/128-bit WEP, WPA, WPA2 |
|
Reception Sensitivity
|
- 11b: 11M: -81dBm@8% PER - 11g: 54M: -68dBm@10% PER - 11n: HT20 MCS7: -65dBm@10% PER HT40 MCS7: -62dBm@10% PER |
Software | |
|---|---|
Status |
- System Status |
Operation Mode |
- Bridge Mode/AP Mode |
Network |
- LAN Setting |
Wireless |
- Basic Setting |
|
Management
|
- Administrator Setting - Time Setting - Upgrade Firmware - System Configuration - System Log - Reboot Schedule - Logout |
| Others | |
|---|---|
|
Package Contents
|
- WA300-PoE In-Wall Wireless AP * 1 - Quick Installation Guide *1 |
Environment |
- Operating Temperature: 0℃~50℃ (32 ℉~122℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 5%~95% non-condensing - Storage Humidity: 5%~95% non-condensing |
