PLW350 KIT powerline extender suit is designed to expand Wi-Fi signal to every corner of your house through electrical circuitry. With one WPS(Wi-Fi Protected Setup) button, PLW350 KIT can build a quick wireless connection to your home router and copy the SSID and Password automatically to boost your Wi-Fi. Meanwhile, you can connect your PC or other networked devices to PLW350 KIT via Ethernet cable to access the Internet as well. So PLW350 KIT is an ideal solution to simplify your Wi-Fi configuration and unify your home network.
Extend the Internet to Every Room
By connecting to your existing router, PLW350 KIT can copy the wireless network name (SSID) and Password automatically to expand your home Wi-Fi to every room and reduce hard-to-reach areas.
One-click WPS for Wi-Fi Extension
Push the WPS button on both PLW350 KIT and router, secured Wi-Fi extension can be built easily and quickly to boost your Wi-Fi. Then you can take it anywhere of your house to make more Wi-Fi devices connected.
Wired and Wi-Fi Connection Simultaneously
With one Fast Ethernet port, both PLW350 not only broadcast Wi-Fi signal, but also can be used as Access Point, allowing any of your PC/Laptop/IPTV connect to it by Ethernet cable and share high-speed Internet.
Plug and Play
PLW350 add-on extender supports plug and play. Just plug it into outlet, PLW350 will detect the PLW350A in the same circuit and pair automatically. If you want to add more PLW350 add-on extenders in the network, the same way works as well.
Maximum of 8 Add-on Extenders Supported
In the same circuit, PLW350A supports connections to a maximum of 8 PLW350 add-on extenders to build a powerful home or office network, meeting the requirements of any multi-storey houses.
Portable Size
With the compact and stylish design, PLW350 is very convenient for users to take it and plug into any outlet of your house to access the Internet and share “Mobile Wi-Fi & wired network”.
Independent Power Switch
PLW350 KIT provides a independent power ON/OFF button to control the device flexibly and prolong the life of device.
Environmental Protection Design
Featured by low transmission power, low radiation and high reception sensitivity, PLW350 KIT is a real environmentally friendly network solution for smart home.
- Complies with Home Plug AV and wireless IEEE802.11n/g/b standards.
- Up to 200Mbps wired speed and 150Mbps Wi-Fi.
- One-touch for secured wireless extension simply.
- Supports AP mode and Repeater mode.
- Twin Pack design helps establish a basic powerline network.
- No need Ethernet cables, using electrical wires.
- Both wired and Wi-Fi connection are available.
- Independent Power ON/OFF button for easy device control.
- Wi-Fi Schedule and Reboot Schedule for easy management on powerline extender.
- Environmental protection design.
| Hardware | |
|---|---|
| Interface | - 1*10/100Mbps Ethernet Port |
| Power Supply | - AC 100V~240V |
| Button | - 1*Power button, 1*WPS button, 1* RST button |
| LED Indicators | - 1*Power, 1*LAN, 1*Link, 1*WiFi |
Wireless | |
| Standards |
- HomePlug AV, IEEE 802.3, IEEE 802.3u - IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
RF Frequency |
- 2.4GHz |
| Data Rate |
- Up to 150Mbps Wi-Fi - 200Mbps over Powerline |
EIRP |
< 20dBm |
| Wireless Security |
- 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK - 128-bit AES link encryption with key management |
| Reception Sensitivity |
- 11b 11M: - 81 dBm - 11g 54M: - 68 dBm - 11n HT20: - 65 dBm HT40: - 62 dBm |
Software | |
Operation Mod |
- AP Mode - Repeater Mode |
| Wireless Functions |
- Basic Setting - Advanced Setting |
| Schedule |
- Wi-Fi Schedule - Reboot Schedule |
| Service |
- System Log, Admin Setup, Firmware Upgrade, System Time, Config Backup and Restor |
| Others | |
| Package Contents |
- PLW350 KIT *1 - Quick Installation Guide *1 |
| Environment |
- Operating Temperature: 0℃~50℃ (32 ℉~104℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 10%~90% non-condensing - Storage Humidity: 5%~90% non-condensing |
It is suitable for: PL200, PLW350 |
No matter how far it is, PLCs can connect to each one only if they are in the same loop of circuit.
It is suitable for: PL200, PLW350 |
Maximum 8 PLCs are allowed to pair with synchronously.
It is suitable for: PL200, PLW350 |
Application : You can connect a number of devices on a powerline network, but you can only use the pair button on two devices at a time. We suppose that the Powerline adapter that connected with the Router is adapter A, and that connected with the computer is adapter B.
Please follow the below steps to create a secured Powerline network using the pair button:
STEP-1:
Press the pair button of Powerline adapter A for about 3 seconds, the Power LED will start flashing.
STEP-2:
Press the pair button of Powerline adapter B for about 3 seconds, the Power LED will start flashing.
Note:This must be done within 2 seconds after pressing the pair button of powerline adapter A.
STEP-3:
Wait for about 3 seconds while your Powerline adapter A and B are connecting. The Power LED on both adapters will stop flashing and become solid light when the connection is made.
|
It is suitable for: PL200, PLW350 |
Press and hold Sec/Rst button for about 10 seconds, the device will reset to factory settings and reboot again.
