It is suitable for:
N150RA, N300R Plus, N300RA, N300RB, N300RG, N301RA, N302R Plus, N303RB, N303RBU, N303RT Plus, N500RD, N500RDG, N505RDU, N600RD, A1004, A2004NS, A5004NS, A6004NS
Application introduction: AP Client mode allows users with laptop to surf Internet by wireless connection. It’s designed to add wireless function for existed wired Router.
STEP-1: Connect your computer to the router
1-1. Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.1.1 into the address bar of your browser.
Note: The default IP address of TOTOLINK router is 192.168.1.1, the default Subnet Mask is 255.255.255.0. If you can't log in, Please restore factory settings.
1-2. Please click Setup Tool icon to enter the router’s setting interface.
1-3. Please login to the Web Setup interface (the default user name and password is admin).
Click Advanced Setup->Wireless->Wireless Mutibridge on the navigation bar on the left.
Finished the settings on the page as below, Click Add button after setting.
--Wireless Mode: Use Wireless WAN
--SSID: Scan the router’ AP
--Authentication & Encryption: choose encryption type and enter the password.
After click Search AP, it will pop up the page. Choose the AP by double click and then click Select AP button.
Click Advanced Setup->Network->LAN/DHCP Server on the navigation bar on the left.
Change the third column of the LAN IP (LAN segment should not be the same with the primary router). Generally, enter 2 if there’s no particular requirement. Then click Apply& Restart button.
Wait for 40 seconds, and then it will pop up a window prompts you to reconnect the website as the LAN IP has changed.
Login the router’s setting interface, and check the Internet status.