Application introduction
Wireless signals generally refer to Wi-Fi, wireless SSID and wireless password is the wireless terminal to connect the router to the Internet the most important two information. The actual use of the process, if there is no connection on the wireless, forget the wireless password, you need to view or modify the signal SSID and password.
The operation of this document applies to the following models：
A1004 / A2004NS / A5004NS / A6004NS
Set up steps
STEP-1: Enter the setup interface
Open the browser, clear the address bar, enter 192.168.1.1, select Setup Tool.fill in the administrator account and password (default admin), click Login, as follows:
Note: The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2: View or modify the wireless parameters
2-1. Check or modify in Easy Setup page
Click Wireless Setup(2.4GHz), Modify the SSID according to your preference. Select encryption method (default encryption is recommended)，Enter the password, if you need to clear the password, you can choose Unhide，click Apply.
Click Wireless Setup(5GHz), Modify the SSID according to your preference. Select encryption method (default encryption is recommended)，Enter the password, if you need to clear the password, you can choose Unhide，click Apply.
2-2. Check and modify In the Advanced Setup.
If you need to set more wireless parameters, you need to enter Advanced Setup --- Wireless (2.4GHz) or Advanced Setup --- Wireless (5GHz). And then select the parameters you need to change in the pop-up submenu.
Questions and Answers
Q1: After setting up the wireless signal, need to restart the router?
A: No need. After setting the parameters, wait a few seconds for the configuration to take effect.
