/themes/my_demo/public/assets/images/s24w1.png

A2004NS repeater setting


     It is suitable for: A1004 / A2004NS / A5004NS / A6004NS


Application introduction: Solution about how to set repeater mode on TOTOLINK products.



STEP-1: Connect your computer to the router

1-1. Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.1.1 into the address bar of your browser.

1.png

Note:The default access address differs by model. Please find it on the bottom label of the product.


1-2. Please click Setup Tool icon   2.png  to enter the router’s setting interface.


3.png

1-3.Please login to the Web Setup interface (the default user name and password is admin).


4.png


STEP-2:Wireless(2.4GHz) repeater setting

Please go to Advance Setup ->Wireless(2.4GHz)->Wireless Multibridge , and check which you have selected.

    Select Use Wireless Bridge and WPAPSK/WPA2PSK+TKIP/AESin Encryption, then Click AP Scan.

4.png

Then select the host router’s SSID and way of Encryption ,then input password of the host router’s SSID and Click Apply. 

5.png


STEP-3: Wireless(5GHz) repeater setting

Please go to Advance Setup ->Wireless(5GHz) ->Wireless Multibridge , and check which you have selected.

       Select Use Wireless Bridge in Mode and WPAPSK/WPA2PSK+TKIP/AES in Encryption, then Click AP Scan.

6.png


 Then select the host router’s SSID and way of Encryption ,then input password of the host router’s SSID and Click Apply.

7.png

PS: After completing the above operation, please re-connect your SSID after 1 minute or so. if the Internet is available it means that the settings are successful. Otherwise, please re-set the settings again