Application introduction
The wireless extender is a repeater (Wi-Fi signal amplifier), which relays a WiFi signal, expands the original wireless signal, and extends the WiFi signal to other places where there is no wireless coverage or where the signal is weak.
This article applies to: EX200
Diagram
Set up steps
STEP-1：Configure the extension
l Please reset the extender first by pressing the reset button/hole on the extender.
l Connect to the extender's LAN port with a network cable from a computer network port (or to search for and connect the expander's wireless signal)
Note: The default Wi-Fi Name and Password are printed on the Wi-Fi Info Card to connect to theextender.
STEP-2：Login to the management page
Open the browser, clear the address bar, enter 192.168.0.254 to the management page, Then check Repeater Setting.
STEP-3：View or modify the wireless parameters
Click ❶Show,->❷Choose your router’s 2.4GHz SSID->❸Enter your router’s wireless password, ❹Change the SSID and password for extended 2.4GHz wireless network, ❺click Connet.
STEP-4：Extender position display
Move the Extender to a different location for a best Wi-Fi access.
