How to set up the router to work as a AP mode？

Application introduction:

AP mode,connect the superior AP/Router by wire, you can bridge the superior's AP/Router wired signal into wireless Wi-Fi signals for Wi-Fi devices. Here we take A3000RU for demonstration.

Note: Confirm that your wired network can share the Internet.

Diagram 

Set up steps 

STEP-1:

Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.

Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.

STEP-2:

User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.

STEP-3: 

Enter the Advanced Setup page of the router, then follow the steps illustrated.

①Click Operation Mode>②Select AP Mode->③Click Apply button.

STEP-4:

Next set the wireless SSID and password. Finally click Connect.

STEP-5:

Congratulations! Now all your Wi-Fi enabled devices can connect to the customized wireless network.

Note:

After the AP mode is set successfully, you cannot log in to the management page. If you need to make changes, please Reset the router.