- Complies the IEEE 802.11ac/a/b/g/n standards.
- Supports 4G+ Cat6 to boost the data speeds of up to 300Mbps.
- Creates a simultaneous dual band Wi-Fi network ,with maximum speeds of up to 300Mbps on the 2.4GHz band and 867Mbps on the 5GHz band.
- MU-MIMO supported – simultaneous data streams increase WiFi throughput and network efficiency.
- 4 high-gain antennas, WiFi signal is stronger, 4G signal is better.
- Full gigabit ports offer larger capability for data forwarding via cable connection.
- Supports the LTE-FDD,LTE-TDD,WCDMA,GSM network type.
- Requires no configuration ,just insert a SIM card and turn it on to enjoy a fast wireless connection.
- Provides 64/128-bit WEP, WPA, WPA2 and WPA/WPA2 encryptions.
- Supports IP, MAC, URL filtering , Port Forwarding and DMZ
- Supports high standard of 8KV/15KV ESD protection.
- With built-in 4G SIM card slot, allowed to share 4G Wi-Fi with your simply by plugging one 4G SIM car.
Hardware | |
---|---|
Interface |
- 1 * 10/100/1000M WAN Port - 3 * 10/100/1000M LAN Port - 1 * Standard SIM card slot |
Power Supply |
- 12 VDC / 1 A |
Button |
- 1 *RESET Button |
LED Indicator |
- 1 *Sys, 1 *SMS, 1 *5G WIFI, 1 *2.4G WIFI, 1*LTE,4*Signal - 1 *WAN/LAN, 3 *LAN |
Antenna |
- 2 * 5dBi internal antennas (2.4G), - 2 * 5dBi detachable antennas ((4G) |
Dimensions (L x W x H) |
- 195.5*126.9*28.6(mm) |
Wireless | |
---|---|
Standards |
- IEEE 802.11ac, - IEEE 802.11a, - IEEE 802.11b, |
RF Frequency | - 2.4GHz/5GHz |
Data Rate |
- 2.4GHz: Up to 300Mbps - 5GHz: Up to 867Mbps |
EIRP |
- 2.4GHz < 20dBm |
Wireless Security |
- 64/128-bit WEP, WPA and WPA2 |
Reception Sensitivity |
- 2.4G: 11b 11M:-81dBm@8% PER 11g 54M:-68dBm@10% PER 11n HT20 MCS7:-65dBm@10% PER HT40 MCS7:-62dBm@10% PER - 5G: 11a 54M:-68dBm@10% PER 11n HT20 MCS7:-65dBm@10% PER HT40 MCS7:-62dBm@10% PER 11ac VHT80 MCS9:-51dBm@10% PER |
LTE Mode | |
---|---|
LTE chip (miniPCIE, optional, customizable) |
- Qualcomm |
LTE Network Type and Band (1) |
- FDD: B1/B3/B5/B7/B8/B20/B28/B32 - TDD: B38/B40/B41 - WCDMA: B1/B3/B5/B8 |
Software | |
---|---|
Home State |
- WAN information, - LAN information, - System information |
WAN Type |
- Static IP, - DHCP, - PPPoE, - 4G |
Wireless Functions |
- Multiple SSIDs, - MAC Authentication, - WPS |
Firewall |
- MAC Filtering, - IP/Port Filtering, - URL Filtering, - DMZ |
Management |
- Password, - System Config, - Time Setup, - Firmware update, - System Log |
Device capacity |
- 2.4G: Max 64 users - 5G: Max 64 users |
Others | |
---|---|
Package Contents |
- LR1200GW Wireless Router * 1 - Power Adapter * 1 - Ethernet Cable * 1 - SIM Adapter (Nona, Micro) - Quick Installation Guide * 1 |
Environment |
- Operating Temperature: 0℃~50 ℃ (32 ℉~122℉) - Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉) - Operating Humidity: 10%~90% non-condensing - Storage Humidity: 5%~90% non-condensing |
It is suitable for: Windows 10 for all TOTOTOLINK models |
Background Introduction: |
When my computer is connected to my TOTOLINK router and cannot obtain an IP address, I can check if my PC is configured as a static IP by following these steps
Set up steps |
STEP 1:
Right-click the network icon in the lower right corner of the desktop, click to open "Network and internet settings"
STEP 2:
Scroll down, find and click on Network and Sharing Center
STEP 3:
Click on Ethernet
STEP 4:
Point Properties
STEP 5:
Find and double-click Internet Protocol 4 (TCP/IPv4)
STEP 6:
STEP 7:
The page automatically jumps back to Ethernet and click OK
It is suitable for: All TOTOLINK models |
Background Introduction: |
Assign fixed IP addresses to terminals to prevent some issues caused by IP changes, such as setting up DMZ hosts
Set up steps |
STEP 1: Log in to the wireless router management page
In the browser address bar, enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".
STEP 2
Go to Advanced Settings>Network Settings>IP/MAC Address Binding
After setting, it indicates that the IP address of the device with MAC address 98: E7: F4:6D: 05:8A is bound to 192.168.0.196
It is suitable for: X6000R,X5000R,X60,X30,X18,A3300R,A720R,N200RE-V5, N350RT,NR1800X,LR1200GW(B),LR350 |
Background Introduction: |
After setting a computer in the local area network as a DMZ host, it will not be restricted when communicating with the internet.
For example, a certain computer is in progress
For video conferencing or online games, this computer can be set as a DMZ host to make video conferencing and online games smoother.
Additionally, among internet users
When accessing LAN resources, the server can also be set as a DMZ host.
[Scenario] Suppose you set up an FTP server on the LAN.
[Requirement] Open the FTP server to Internet users, so that family members who are not at home can share the resources on the server.
[Solution] The above requirements can be realized by setting the "DMZ host" function. Assumptions:
Set up steps |
STEP 1: Log in to the wireless router management page
In the browser address bar,
enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".
STEP 2
Find the DMZ host under the Advanced Settings NAT menu and turn it on
STEP 3
Internet users can successfully access the intranet FTP server by using the 'Intranet Service Application Layer
Protocol Name://Current IP Address of the WAN Port'. as
The internal network service port is not the default port number, and the access format is "Internal network service application layer protocol
name://WAN port current IP address: Internal network service
Service Port
In this example, the access address is ftp://113.88.154.233 .
You can find the current IP address of the router's WAN port in the WAN port information.
Note:
1.After the configuration is completed, if internet users still cannot access the local area network FTP server, it may be due to the system firewall,
antivirus software, and other issues on the DMZ host
The security guard has blocked internet users from accessing. Please close these programs before attempting again.
2.Before configuration, please ensure that the router WAN port obtains a public IP address.
If it is a private IP address or an internal IP address assigned by the network operator (in the order of 100
At the beginning, it will result in the inability to implement the function.
The commonly used address categories for IPv4 include Class A, Class B, and Class C.
The private network address for Class A address is 10.0.0.0~10.25.255.255;
The private network addresses for Class B addresses are 172.16.0.0~172.31.255.255;
The private network address for Class C addresses is
192.168.0.0~192.168.255.255.
It is suitable for: X6000R,X5000R,X60,X30,X18,A3300R,A720R,N200RE-V5, N350RT,NR1800X,LR1200GW(B),LR350 |
Background Introduction: |
Remote WEB management can log in to the router's management interface from a remote location through the Internet, and then manage the router.
Set up steps |
STEP 1: Log in to the wireless router management page
In the browser address bar, enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface
login password and click "Login".
STEP 2:
1. Find advanced settings
2. Click on the service
3. Click on Remote Management and Apply
STEP 3:
1. We check the IPV4 address obtained from the WAN port through advanced system status settings
2.You can access the mobile network through your phone, as shown in the figure below, with WAN IP +port number
3. The WAN port IP may change over time. If you want to access remotely through a domain name, you can set up DDNS.
For details, please refer to: How to Set DDNS Function on TOTOLINK Router
Note: The default web management port of the router is 8081, and remote access must use the "IP address: port" method
(such as http;//wan port IP: 8080) to log in to the router and perform web interface management.
This feature requires restarting the router to take effect. If the router sets up a virtual server to occupy port 8080,
it is necessary to modify the management port to a port other than 8080.
It is recommended that the port number be greater than 1024, such as 80008090.
It is suitable for: TOTOLINK All Models |
Background Introduction: |
What should I do if I want to restrict access to the network for some devices or children's devices
Set up steps |
STEP 1: Log in to the wireless router management page
In the browser address bar, enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".
STEP 2:
Follow these steps
1. Enter advanced settings
2. Click on Security Settings
3. Find MAC filtering
STEP 3:
After the restrictions were completed, I found that I couldn't access the internet with my device
It is suitable for: X6000R,X5000R,X60,X30,X18,T8,T6,A3300R,A720R,N350RT,N200RE_V5,NR1800X,LR1200W(B),LR350 |
Background Introduction: |
Controlling the online time of children at home has always been a concern for many parents.
TOTOTOLINK's parental control function perfectly solves parents' worries.
Set up steps |
STEP 1: Log in to the wireless router management page
In the browser address bar, enter: itoolink.net.
Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".
STEP 2 :
Select Advanced ->Parental Controls, and open the "Parental Controls" function
STEP 3 :
Add new rules, scan all device MACs connected to the router, and select the devices that need to be added with control
STEP 4 :
Set the time period for allowing internet access, and add it to the rules after completing the setting.
The following figure shows that devices with MAC 62:2F: B4: FF: 9D: DC can only access the internet from 18:00 to 21:00 from Monday to Friday
STEP 5:
At this point, the parental control function has been set up, and the corresponding devices can only access the network within the corresponding time range
Note: To use the parental control function, select the time zone in your region