/themes/my_demo/public/assets/images/s24w1.png

X6000R

- Complies with the next generation Wi-Fi 6 (IEEE 802.11ax) standard.

- Simultaneous 2402Mbps on 5GHz and 574Mbps on 2.4GHz for a total of 3000Mbps.

- 1.3GHz Dual-Core CPU perform outstanding ability in data-processing without any delay.

- OFDMA to improve capacity and efficiency of your network, so more devices can connect without slowing down your Wi-Fi.

- TWT (Target Wake Time) technology reduces your devices' power consumption to extend their battery life.

- MU-MIMO technology allows to transfer data to multiple devices at the same time.

- 2.4GHz 2T2R, 5GHz 3T3R multiple antennas design.

- Beamforming technology improves directional signal transmission, improving the bandwidth efficiency.

- Full gigabit ports offer larger capability for data forwarding via cable connection.

- Supports DHCP, Static IP, PPPoE PPTP and L2TP broadband functions.

- Supports WPA3 wireless security protocols to ensure network security. 

- Support VPN server, Universal Repeater, Guest network, Smart QoS, Wi-Fi Scheduler.

- Parental Control on the router lets you easily manage content and time online on any connected device. 

- Easy Mesh function for easy Wi-Fi extension and seamless roaming.

- Easy setup and management with phone UI and TOTOLINK Router APP.

Hardware

Interface

- 1 * 1000Mbps WAN Port

- 4 * 1000Mbps LAN Port

Power Supply

- 12VDC/1A 

Antenna

- 4* external detachable antennas

(1*Dual band antenna + 1* 2.4G antennas+2*5G antenna)

Button

- 1 * RST Button

- 1 * MESH Button


LED  

- 1 * SYSTEM  LED

- 1* WAN LED

- 4* LAN LED

Dimensions 

(L x W x H)

- 241.0 x 147.0 x 48.5mm

Wireless
Standards 

- IEEE 802.11ax

- IEEE 802.11ac

- IEEE 802.11n 

- IEEE 802.11g

- IEEE 802.11b

- IEEE 802.11a

RF 

Frequency 

- 2.4~2.4835GHz

- 5.18~5.825GHz

Data Rate 

- 2.4GHz:  Up to 574Mbps

- 5GHz:  Up to 2402Mbps

EIRP

- 2.4GHz < 20dBm

- 5GHz < 20dBm 

Wireless 

Security

- WPA2/WPA Mixed 

- WPA3

Reception 

Sensitivity 

- 2.4G:11b 11M:-85dBm@8% PER

           11g 54M:-72dBm@10% PER

           11n HT20 MCS7:-68dBm@10% PER   

           11n HT40 MCS7:-65dBm@10% PER   

           11ax HT20 MCS11:-68dBm@10% PER   

           11ax HT40 MCS11:-65dBm@10% PER   

- 5G: 11a 54M:-72dBm@10% PER

        11n HT20 MCS7:-68dBm@10% PER    

        11n HT40 MCS7:-65dBm@10% PER

        11ac VHT80 MCS9:-55dBm@10% PER

        11ax HE80 MCS11:-51dBm@10% PER

        11ax HE160 MCS11:-46dBm@10% PER  

Software

Home

                       

- Quick Setup            

- Basic setup             

- Advanced setup

- QR Code                 

- LED                        

- Logout   

- Reboot

 Network

                     

- WAN Setting            

- LAN Setting           

- DDNS Setting

- IPTV Setting            

- IPv6 Setting

WAN Type

- Static IP 

- DHCP 

- PPPoE/Russia PPPoE 

- PPTP/Russia PPTP 

- L2TP/Russia L2TP

Wireless                          

- Basic setup              

- Guest Network(Multiple SSID)        

- Wireless Schedule   

- Access Control       

- Advanced setup

Parental Control                           

- Internet time control based on MAC


QoS                           

- Up/Down speed control on WAN, Bandwidth control based on IP address


Device management

- Static Route            

- Routing Table         

- IP/MAC Binding

Security                           

- MAC Filtering          

- IP/Port Filtering      

- URL Filtering 

NAT                           

- Virtual Server(Port Forwarding)               

- DMZ    

- VPN passthrough

VPN Sever                           

- L2TP VPN

- Account Management

Tools                           

- Upgrade Firmware    

- Time Setup              

- Remote management

- UPnP                      

- Password Settings   

- Reboot Schedule 

- Ping Diagnosis        

- Route Tracking        

- TR-069 Config

- System Log and so on 


Others

Package Contents

                     

- X6000R Wireless Router *1

- Power Adapter *1

- Ethernet Cable *1

- Quick Installation Guide *1

Environment

                     

- Operating Temperature: 0℃~40 ℃ (32 ℉~104℉)

- Storage Temperature: -40℃~70 ℃ (-40 ℉~158℉)

- Operating Humidity: 10%~90% non-condensing

- Storage Humidity: 5%~90% non-condensing


  • 1

  • 2

No

Title

Views
1

How to Configure a Static IP Address for a PC

130
It is suitable for: Windows 10 for all TOTOTOLINK models
  Background Introduction:

When my computer is connected to my TOTOLINK router and cannot obtain an IP address, I can check if my PC is configured as a static IP by following these steps


  Set up steps

STEP 1: 

Right-click the network icon in the lower right corner of the desktop, click to open "Network and internet settings"

1.png

STEP 2:

Scroll down, find and click on Network and Sharing Center

2.png

STEP 3:

Click on Ethernet

3.png

STEP 4:

Point Properties

4.png

STEP 5

Find and double-click Internet Protocol 4 (TCP/IPv4)

5.png

STEP 6:

6.png

STEP 7:

The page automatically jumps back to Ethernet and click OK



2

How to configure static IP address allocation for TOTOLINK routers

129
It is suitable for: All TOTOLINK models
  Background Introduction:

Assign fixed IP addresses to terminals to prevent some issues caused by IP changes, such as setting up DMZ hosts

  Set up steps

STEP 1: Log in to the wireless router management page

In the browser address bar, enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".

1.png

STEP 2

Go to Advanced Settings>Network Settings>IP/MAC Address Binding

2.png

After setting, it indicates that the IP address of the device with MAC address 98: E7: F4:6D: 05:8A is bound to 192.168.0.196

3.png



3

How TOTOLINK Router Uses DMZ Host

107

It is suitable for: 

X6000R,X5000R,X60,X30,X18,A3300R,A720R,N200RE-V5,

N350RT,NR1800X,LR1200GW(B),LR350

  Background Introduction:

After setting a computer in the local area network as a DMZ host, it will not be restricted when communicating with the internet. 

For example, a certain computer is in progress

For video conferencing or online games, this computer can be set as a DMZ host to make video conferencing and online games smoother. 

Additionally, among internet users

When accessing LAN resources, the server can also be set as a DMZ host.

[Scenario] Suppose you set up an FTP server on the LAN.

[Requirement] Open the FTP server to Internet users, so that family members who are not at home can share the resources on the server.

[Solution] The above requirements can be realized by setting the "DMZ host" function. Assumptions:


  Set up steps


STEP 1: Log in to the wireless router management page

In the browser address bar, 

enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".

1.png

STEP 2

Find the DMZ host under the Advanced Settings NAT menu and turn it on

2.png

STEP 3

Internet users can successfully access the intranet FTP server by using the 'Intranet Service Application Layer 

Protocol Name://Current IP Address of the WAN Port'. as

The internal network service port is not the default port number, and the access format is "Internal network service application layer protocol 

name://WAN port current IP address: Internal network service

Service Port

In this example, the access address is ftp://113.88.154.233 . 

You can find the current IP address of the router's WAN port in the WAN port information.

 3.png

4.png



Note:

1.After the configuration is completed, if internet users still cannot access the local area network FTP server, it may be due to the system firewall, 

  antivirus software, and other issues on the DMZ host

  The security guard has blocked internet users from accessing. Please close these programs before attempting again.

2.Before configuration, please ensure that the router WAN port obtains a public IP address. 

  If it is a private IP address or an internal IP address assigned by the network operator (in the order of 100

At the beginning, it will result in the inability to implement the function. 

The commonly used address categories for IPv4 include Class A, Class B, and Class C. 

The private network address for Class A address is 10.0.0.0~10.25.255.255; 

The private network addresses for Class B addresses are 172.16.0.0~172.31.255.255; 

The private network address for Class C addresses is

192.168.0.0~192.168.255.255.


4

How to Set up Remote Web Access on TOTOLINK Wireless Router

167

It is suitable for: 

X6000R,X5000R,X60,X30,X18,A3300R,A720R,N200RE-V5,

N350RT,NR1800X,LR1200GW(B),LR350

  Background Introduction:

Remote WEB management can log in to the router's management interface from a remote location through the Internet, and then manage the router.


  Set up steps

STEP 1: Log in to the wireless router management page

In the browser address bar, enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface 

login password and click "Login".

  1.png

STEP 2:

1. Find advanced settings

2. Click on the service

3. Click on Remote Management and Apply

2.png

STEP 3:

1. We check the IPV4 address obtained from the WAN port through advanced system status settings

3.png

2.You can access the mobile network through your phone, as shown in the figure below, with WAN IP +port number

4.png5.png

3. The WAN port IP may change over time. If you want to access remotely through a domain name, you can set up DDNS. 

   For details, please refer to: How to Set DDNS Function on TOTOLINK Router


Note: The default web management port of the router is 8081, and remote access must use the "IP address: port" method 

         (such as http;//wan port IP: 8080) to log in to the router and perform web interface management. 

         This feature requires restarting the router to take effect. If the router sets up a virtual server to occupy port 8080, 

         it is necessary to modify the management port to a port other than 8080. 

         It is recommended that the port number be greater than 1024, such as 80008090.


5

How to restrict device access to the internet

131
It is suitable for: TOTOLINK All Models
  Background Introduction:

What should I do if I want to restrict access to the network for some devices or children's devices


  Set up steps

STEP 1: Log in to the wireless router management page

In the browser address bar, enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".

1.png

STEP 2:

Follow these steps

1. Enter advanced settings

2. Click on Security Settings

3. Find MAC filtering

2.png3.png4.png

STEP 3:

After the restrictions were completed, I found that I couldn't access the internet with my device



6

How to set parental control function on TOTOLINK router

203

It is suitable for: 

X6000R,X5000R,X60,X30,X18,T8,T6,A3300R,A720R,N350RT,N200RE_V5,NR1800X,LR1200W(B),LR350

  Background Introduction:

Controlling the online time of children at home has always been a concern for many parents. 

TOTOTOLINK's parental control function perfectly solves parents' worries.


  Set up steps

STEP 1: Log in to the wireless router management page

In the browser address bar, enter: itoolink.net. 

Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".

1.png

STEP 2 :

Select Advanced ->Parental Controls, and open the "Parental Controls" function

2.png

STEP 3 :

Add new rules, scan all device MACs connected to the router, and select the devices that need to be added with control

3.png4.png5.png

STEP 4 :

Set the time period for allowing internet access, and add it to the rules after completing the setting.

The following figure shows that devices with MAC 62:2F: B4: FF: 9D: DC can only access the internet from 18:00 to 21:00 from Monday to Friday

6.png

STEP 5:

At this point, the parental control function has been set up, and the corresponding devices can only access the network within the corresponding time range

7.png

Note: To use the parental control function, select the time zone in your region


7

How to set up an IPV6 internet connection on a TOTOTOLINK wireless router

226

It is suitable for: 

X6000R,X5000R,X60,X30,X18,A3300R,A720R

  Background Introduction:

With the popularization of IPV6 technology, 32-bit IPv4 addresses have been exhausted, and IPv6 uses a 128 bit address length to have a larger address space.


  Set up steps

STEP 1: Log in to the wireless router management page

In the browser address bar, enter: itoolink.net. Press the Enter key, and if there is a login password, enter the router management interface login password and click "Login".

1.png

STEP 2: 

Your ISP should have provided the following information:

PPPoE, Dynamic IP (SLAAC/DHCPv6), Pass-Through (Bridge), and Static IP.

Go to Advanced >Network> IPv6.

2.png

STEP 3:

Case 1: IPv4 Connection Type is “Dynamic IP”

3.png

You can choose dynamic IP and apply it here. This situation requires your ISP's support, otherwise dialing will fail. Generally, this type of application scenario is rare

Case 2:

1. IPv4 Connection Type is “PPPoE”4.png

2. When the ISP provides IPV4 to use DHCP for internet access, and IPV6 uses PPPoE for dial-up internet access, you can choose Only IPV6

5.png

Case 3: 

There Is A Main Router in Front of Your TOTOLINK Wireless Router

1. Select PassThrough  for the Internet Connection Type

2. Click Apply.

6.png

Case 4: 

IPv4 Connection Type is “Static IP”

1. Select Static IP.

2. Manually Enter the Information Provided by Your ISP.

Note: If you do not know what your internet connection type is, contact your ISP or judge according to the already known information provided by your ISP.

3. Click Apply.

7.png

STEP 3:Check if IPV6 was successfully obtained

1.You can view the connection status of the router interface IPV6 through advanced settings → home → IPV6 status

8.png

2. It can also be achieved through https://www.test-ipv6.com/ Speed measurement IPV6 network

9.png


8

How to setup TOTOLINK Router on new App

109
It is suitable for: All TOTOLINK New Products
 Application introduction:

This article introduces a wireless router compatible with TOTOTOLINK APP, using X6000R as an example

 Set up steps

STEP 1:

Follow the steps below to connect your router.

1.png

STEP 2 :

Connect the mobile phone to the WiFi of TOTOLINK_X6000R, as shown in the figure below

2.png



STEP 3 

Launch the Tether App on your phone

3.png

If there is no such APP, the Android device can download it through the Google play store,

Apple devices can be downloaded through the IOS store

1. Android device

4.png

2. IOS device  

5.png

STEP 4 

Select your TOTOLINK wireless router from device list. Then Enter admin for the password and then click LOGIN.

6.png

7.png

STEP-5: Log in to Quick Setup (Auto jump Quick Setup is only Applicable for the first connection setup)

8.png

STEP-6: Quick Setup.

9.png10.png11.png12.png13.png


14.png15.png

STEP-7: More features: Click Application or Tools.

16.png17.png

STEP-8: Binding router, remote management. 

18.png19.png



9

How to configure the computer to automatically obtain an IP address

87
It is suitable for: all TOTOTOLINK models
  Application introduction:

When my computer is connected to my TOTOLINK router and cannot obtain an IP address, I can check if my PC is configured as a static IP by following these steps


  Set up steps

STEP 1: 

Right-click the network icon in the lower right corner of the desktop, click to open "Network and internet settings"

1.png

STEP 2:

Scroll down, find and click on Network and Sharing Center

2.png

STEP 3:

Click on Ethernet

3.png

STEP 4:

Point Properties

4.png

STEP 5:

Find and double-click Internet Protocol 4 (TCP/IPv4)

5.png

STEP 6:

6.png

STEP 7:

The page automatically jumps back to Ethernet and click OK


10

How to Set DDNS Function on TOTOLINK Router

178

It is suitable for: 

X6000R、X5000R、A3300R、A720R、N350RT、N200RE_V5、T6、T8、

X18、X30、X60

  Background Introduction:

The purpose of setting up DDNS is: under broadband dial-up internet access, the WAN port IP usually changes after 24 hours. 

When the IP changes, it cannot be accessed through the previous IP address. 

Therefore, setting up DDNS involves binding the WAN port IP through a domain name. 

When the IP changes, it can be accessed directly through the domain name.


  Set up steps

STEP 1:

Follow the steps below to connect your router.

1.png

STEP 2 :

Connect the computer to the router WiFi and enter "192.168.0.1" in the PC browser to log in to the web management interface. 

The default login password is: admin

2.png

STEP 3 :

Set the network connection type to PPPoE, this step is to enable the router to obtain a public IP address

3.png4.png


STEP 4 :

Select Advanced Settings ->Network ->DDNS, enable the ddns function, then select your ddns service provider 

(support: DynDNS, No IP, WWW.3322. org), and enter the corresponding service provider's username and password. 

After saving, the domain name will automatically bind to your public IP address.

5.png


STEP 5: 

After everything is set up, you can open the remote management function for testing. 

By using a dynamic domain name and port, you can access the router management page even if it is not within the same local area network. 

If the access is successful, it indicates that your DDNS settings are successful.

6.png7.png


You can also ping the domain name through the CMD of the PC, and if the returned IP is a WAN port IP address, it indicates successful binding.

8.png


1